Publication
2022~
1. Optimization of mixed grain size structure for enhancement of thermoelectric figure of merit in p-type BiSbTe-based alloys, Peyala Dharmaiah, Dae-Hyeon Kim, Jin-gu Kwon, Yeeun Lee, Sangwon Geum, Ga-ram Lee, Minjae Kang, Soon-Jik Hong, Journal of Materials Science 57.38 (2022): 18131-18141
2. Investigation of anisotropy in microstructure and thermoelectric properties of large-scaled p-type Bi–Sb–Te sintered body made by hot pressing, Babu Madavali, Van Dao Nguyen, Sung Jae Jo, Chul-hee Lee, Soon-Jik Hong, Journal of Materials Science 57.38(2022): 18168-18177
3. Enhancing the thermoelectric properties of powder metallurgically produced BiSbTe alloy through feasible electroless surface coating method, Pathan Sharief, Babu Madavali, Peyala Dharmaiah, JunWoo Song, Gian-Song, Youhan Sohn, JunHyun Han, Sung Ho Song, Soon-Jik Hong, Journal of the European Ceramic Society (2022):
4. The subsurface deformed region and superficial protective tribo-oxide layer during wear in a non-equiatomic CoCrFeNiV high entropy alloy, Farahnaz Haftlang, Alireza Zargaran, Sujung Son, Sunghak Lee, Soon-Jik Hong, Hyoung Seop Kim, Materials & Design (2022): 110685.
5. Enhancement of thermoelectric performance of Bi0. 5Sb1. 5Te3 alloy by inclusion of LaVO3 Mott insulator, Huynh Thanh-Nam, Madavali Babu, Hayk.H.Nersisyan, LeeJin-Kyu, KimKi-Buem, SongGian, LeeJong-Hyeon, HongSoon-Jik, Chemical Engineering Journal (2022): 135460
6. Synergistic optimization of the thermoelectric and mechanical properties of large-size homogeneous Bi0. 5Sb1. 5Te3 bulk samples via carrier engineering for efficient energy harvesting, Chul-hee Lee, Peyala Dharmaiah, Dong Hwan Kim, Duck Ki Yoon, Tae Hoon Kim, Sung Ho Song, Soon-Jik Hong, ACS Applied Materials & Interfaces 14.8(2022): 10394-10406
7. Synthesis of NdFeB Magnetic Particles With High (BH) max From Their Optimized Oxide Powders Through Reduction–Diffusion Method, Rambabu Kuchi, Vitalii Galkin, Seunghyun Kim, Jong-Ryul Jeong, Soon-jik Hong, Dongsoo Kim, IEEE Magnetics Letters 13(2022) : 1-4
8. Metallic phase transition metal dichalcogenide quantum dots as promising bio-imaging materials, Kwang Hyun Park , ,Jun Yong Yang, Sunggyeong Jung, Byoung Min Ko, Gian Song, Soon-Jik Hong, Nam Chul Kim, Dongju Lee, Sung Ho Song, Nanomaterials 12.10(2022): 1645
9. Carbon-assisted growth of equiangular 2D hexagons of AlN, HaykNersisyan, NamHuynh Thanh, JongHyeon Lee, Hoyoung Suh, SoonJik Hong, Materials Letters 314 (2022): 131840
10. Outstanding high-temperature strength of novel Fe–Cr–Ni–Al–V ferritic alloys with hierarchical B2–NiAl precipitates, Kanghyun Park, Byungchan Cho, Soon Jik Hong, Ka Ram Lim, Chanho Lee, Gian Song, Materials Science and Engineering: A, 840(2022): 142999
11. Enhancing the thermoelectric properties through hierarchical structured materials fabricated through successive arrangement of different microstructure, Pathan Sharief, Peyala Dharmaiah, Babu Madavali, Jun Woo Song, Jin Kyu Lee, Jong Hyeon Lee, Soon-Jik Hong, Journal of Alloys and Compounds 910(2022): 164803
12. Developing harmonic structure in CoCrFeMnNi high entropy alloy to enhance mechanical properties via powder metallurgy approach, Cheenepalli Nagarjuna, JunWoo Song, Kwang Yong Jeong, Min-Wook Pin, Gian Song, Jin Kyu Lee, Young-Sang Na, Hyoung Seop Kim, Ki Buem Kim, Soon-Jik Hong, Journal of Materials Research and Technology 17(2022): 1686-1695
13. Strengthening the mechanical properties and wear resistance of CoCrFeMnNi high entropy alloy fabricated by powder metallurgy, Cheenepalli Nagarjuna, Kwang Yong Jeong, Yeeun Lee, Shin Min Woo, Sun Ig Hong, Hyoung Seop Kim, Soon-Jik Hong, Advanced Powder Technology 33.4(2022): 103519
14. Fabrication of ultrafine powder using processing control agent, and investigation of its effect on microstructure and thermoelectric properties of p-type (Bi, Sb) 2Te3 alloys, Babu Madavali, Pathan Sharief, Jun-woo Song, KiBuem Kim, C.Suryanarayana, Sung Ho Song, Soon-Jik Hong, Advanced Powder Technology 33.2 (2022): 103386
1. Optimization of mixed grain size structure for enhancement of thermoelectric figure of merit in p-type BiSbTe-based alloys, Peyala Dharmaiah, Dae-Hyeon Kim, Jin-gu Kwon, Yeeun Lee, Sangwon Geum, Ga-ram Lee, Minjae Kang, Soon-Jik Hong, Journal of Materials Science 57.38 (2022): 18131-18141
2. Investigation of anisotropy in microstructure and thermoelectric properties of large-scaled p-type Bi–Sb–Te sintered body made by hot pressing, Babu Madavali, Van Dao Nguyen, Sung Jae Jo, Chul-hee Lee, Soon-Jik Hong, Journal of Materials Science 57.38(2022): 18168-18177
3. Enhancing the thermoelectric properties of powder metallurgically produced BiSbTe alloy through feasible electroless surface coating method, Pathan Sharief, Babu Madavali, Peyala Dharmaiah, JunWoo Song, Gian-Song, Youhan Sohn, JunHyun Han, Sung Ho Song, Soon-Jik Hong, Journal of the European Ceramic Society (2022):
4. The subsurface deformed region and superficial protective tribo-oxide layer during wear in a non-equiatomic CoCrFeNiV high entropy alloy, Farahnaz Haftlang, Alireza Zargaran, Sujung Son, Sunghak Lee, Soon-Jik Hong, Hyoung Seop Kim, Materials & Design (2022): 110685.
5. Enhancement of thermoelectric performance of Bi0. 5Sb1. 5Te3 alloy by inclusion of LaVO3 Mott insulator, Huynh Thanh-Nam, Madavali Babu, Hayk.H.Nersisyan, LeeJin-Kyu, KimKi-Buem, SongGian, LeeJong-Hyeon, HongSoon-Jik, Chemical Engineering Journal (2022): 135460
6. Synergistic optimization of the thermoelectric and mechanical properties of large-size homogeneous Bi0. 5Sb1. 5Te3 bulk samples via carrier engineering for efficient energy harvesting, Chul-hee Lee, Peyala Dharmaiah, Dong Hwan Kim, Duck Ki Yoon, Tae Hoon Kim, Sung Ho Song, Soon-Jik Hong, ACS Applied Materials & Interfaces 14.8(2022): 10394-10406
7. Synthesis of NdFeB Magnetic Particles With High (BH) max From Their Optimized Oxide Powders Through Reduction–Diffusion Method, Rambabu Kuchi, Vitalii Galkin, Seunghyun Kim, Jong-Ryul Jeong, Soon-jik Hong, Dongsoo Kim, IEEE Magnetics Letters 13(2022) : 1-4
8. Metallic phase transition metal dichalcogenide quantum dots as promising bio-imaging materials, Kwang Hyun Park , ,Jun Yong Yang, Sunggyeong Jung, Byoung Min Ko, Gian Song, Soon-Jik Hong, Nam Chul Kim, Dongju Lee, Sung Ho Song, Nanomaterials 12.10(2022): 1645
9. Carbon-assisted growth of equiangular 2D hexagons of AlN, HaykNersisyan, NamHuynh Thanh, JongHyeon Lee, Hoyoung Suh, SoonJik Hong, Materials Letters 314 (2022): 131840
10. Outstanding high-temperature strength of novel Fe–Cr–Ni–Al–V ferritic alloys with hierarchical B2–NiAl precipitates, Kanghyun Park, Byungchan Cho, Soon Jik Hong, Ka Ram Lim, Chanho Lee, Gian Song, Materials Science and Engineering: A, 840(2022): 142999
11. Enhancing the thermoelectric properties through hierarchical structured materials fabricated through successive arrangement of different microstructure, Pathan Sharief, Peyala Dharmaiah, Babu Madavali, Jun Woo Song, Jin Kyu Lee, Jong Hyeon Lee, Soon-Jik Hong, Journal of Alloys and Compounds 910(2022): 164803
12. Developing harmonic structure in CoCrFeMnNi high entropy alloy to enhance mechanical properties via powder metallurgy approach, Cheenepalli Nagarjuna, JunWoo Song, Kwang Yong Jeong, Min-Wook Pin, Gian Song, Jin Kyu Lee, Young-Sang Na, Hyoung Seop Kim, Ki Buem Kim, Soon-Jik Hong, Journal of Materials Research and Technology 17(2022): 1686-1695
13. Strengthening the mechanical properties and wear resistance of CoCrFeMnNi high entropy alloy fabricated by powder metallurgy, Cheenepalli Nagarjuna, Kwang Yong Jeong, Yeeun Lee, Shin Min Woo, Sun Ig Hong, Hyoung Seop Kim, Soon-Jik Hong, Advanced Powder Technology 33.4(2022): 103519
14. Fabrication of ultrafine powder using processing control agent, and investigation of its effect on microstructure and thermoelectric properties of p-type (Bi, Sb) 2Te3 alloys, Babu Madavali, Pathan Sharief, Jun-woo Song, KiBuem Kim, C.Suryanarayana, Sung Ho Song, Soon-Jik Hong, Advanced Powder Technology 33.2 (2022): 103386
Previous papers (2021)
1. Formation of inhomogeneous micro-scale pores attributed ultralow κlat and concurrent enhancement of thermoelectric performance in p-type Bi0.5Sb1.5Te3 alloys, Cheenepalli Nagarjuna, Peyala Dharmaiah, Jong-Hyeon Lee, Ki Buem Kim, Gian Song, Jin Kyu Lee, Soon-Jik Hong, Journal of Alloys and Compounds 881 (2021): 160499
2. Investigation of phase-transformation path in TiZrHf (VNbTa) x refractory high-entropy alloys and its effect on mechanical property, Yunjong Jung, Kangjin Lee, Jin Kyu Lee, Junhee Han, Ki Buem Kim, Peter K. Liaw, Chanho Lee, Gian Song, Soon Jik Hong, Journal of Alloys and Compounds 886 (2021): 161187
3. Development of high-performance thermoelectric materials by microstructure control of p-type BiSbTe based alloys fabricated by water atomization, Babu Madavali, Pathan Sharief, Kyoung-Tae Park, Gian Song, Song-Yi Back, Jong-Soo Rhyee and Soon-Jik Hong, Materials 14.17 (2021): 4870
4. Development of coherent-precipitate-hardened high-entropy alloys with hierarchical NiAl/Ni2TiAl precipitates in CrMnFeCoNiAlxTiy alloys, Jong tae Kim, Jin Kyu Lee, Ki Buem Kim, Jong Hyeon Lee, Jun hee Han, Chan ho Lee, Gian Song, Soon Jik Hong, Materials Science and Engineering: A 823 (2021): 141763
5. Tuning of thermoelectric transport properties via the formation of hierarchical structures in Bi‐doped Gd2O3/Bi0.5Sb1.5Te3 nanocomposites, May Likha Lwin, Peyala Dharmaiah, Byeong Ho Min, Gi An Song, Kyeong Youl Jung, Soon-Jik Hong, International Journal of Energy Research 45.15 (2021): 20921-20933
6. Effect of mechanical alloying on the microstructural evolution of a ferritic ODS steel with (Y–Ti–Al–Zr) addition processed by Spark Plasma Sintering (SPS), E. Macía, A. García-Junceda, M. Serrano, M. Campos, S.J. Hong, Nuclear Engineering and Technology 53.8 (2021): 2582-2590
7. Synergetic effects of co-dispersed Cu and insulating HfO2 nanoparticles enabled high thermoelectric figure of merit in Bi0.5Sb1.5Te3 composites, Peyala Dharmaiah, Cheenepalli Nagarjuna, Pathan Sharief, Soon-Jik Hong, Applied Surface Science 556 (2021): 149783
8. Investigation of graphene dispersion on thermoelectric, magnetic, and mechanical properties of p-type Bi0.5Sb1.5Te3 alloys, Pathan Sharief, Babu Madavalia, Sung Ho Song, Jin Kyu Lee, Ki Buem Kim, Jong Tae Kim, Dong Hwan Kim, Jun-Hyun Han, Soon-Jik Hong, Materials Chemistry and Physics 266 (2021): 124512
9. Nano-scale structural evolution of quaternary AlCrFeNi based high entropy alloys by the addition of specific minor elements and its effect on mechanical characteristics, Elyorjon Jumaev, Muhammad Aoun Abbas, Sang Chul Mun, Gi an Song, Ki Buem Kim, Soon-Jik Hong, Journal of Alloys and Compounds 868 (2021): 159217
10. Simultaneous effects of deformation-induced plasticity and precipitation hardening in metastable non-equiatomic FeNiCoMnTiSi ferrous medium-entropy alloy at room and liquid nitrogen temperatures, Farahnaz Haftlang, Peyman Asghari-Rad, Jongun Moon, Alireza Zargaran, Kee-AhnLee, Hyoung SeopKim, Soon-JikHong, Scripta Materialia 202 (2021): 114013
11. Understanding the microstructure and mechanical properties of TaxAl0. 7CoCrFeNi2. 1 eutectic high entropy composites: multi-scale deformation mechanism analysis, Min JungKim, JeongTae Kim, Jumaev Elyorjon, Gyeol Chan Kang, Gian Song, JinKyu Lee, JongHyeon Lee, KiBuem Kim, SoonJik Hong, Composites Part B: Engineering 214 (2021): 108750
12. Effect of Powder Heat Treatment on Chemical Composition and Thermoelectric Properties of Bismuth Antimony Telluride Alloys Fabricated by Combining Water Atomization and Spark Plasma Sintering, Dong-won Shin, Peyala Dharmaiah, Jun-Woo Song and Soon-Jik Hong, Materials 14.11 (2021): 2993
13. Investigation of homogeneity in microstructure and thermoelectric properties at various positions in high-thickness sintered bulks of p-type 20% Bi2Te3–80% Sb2Te3 alloys, Babu Madavali, Chul-Hee Lee, Jin-Gu Han, Dong Hwan Kim, Jong Tae Kim, Gian Song, Jin Kyu Lee & Soon-Jik Hong, Journal of Materials Science: Materials in Electronics 32.12 (2021): 16302-16310
14. Powder characteristics of Al0.5CoCrFeMnNi high-entropy alloys fabricated by gas atomisation method, Yeeun Lee, Cheenepalli Nagarjuna, Jun-Woo Song, Kwang Yong Jeong, Gian Song, Jinkyu Lee, Jong-Hyeon Lee & Soon-Jik Hong, Powder Metallurgy 64.3 (2021): 219-227
15. Enhanced thermoelectric performance of Mo nanoparticle decorated n-type Bi2Te2. 7Se0.3 powder composites, Sang-Seok Lee, Injoon Jang, Jong-Soo Rhyee, SungJong Yoo, Il-Kyu Park, Soon-Jik Hong, Applied Surface Science 548 (2021): 149200
16. Reduction of Thermal Conductivity Through Complex Microstructure by Dispersion of Carbon Nanofiber in p-Type Bi0.5Sb1.5Te3 Alloys, Sharief, P., Madavali, B., Sohn, Y., Han, J. H., Song, G., Hong, S. J., Archives of Metallurgy and Materials 66 (2021)
17. AlN nucleation and spontaneous pattern formation via combustion of an Al-C-AlF3 mixture in nitrogen, Hayk H.Nersisyan, Thanh Nam huynh, Kyoung Tae Park, Jong Hyeon Lee, Soon-Jik Hong, Journal of Crystal Growth 560 (2021): 126044
18. Worn surface and subsurface layer structure formation behavior on wear mechanism of CoCrFeMnNi high entropy alloy in different sliding conditions, Cheenepalli Nagarjuna, Hyeon-Jeong You, Suseong Ahn, Jun-Woo Song, Kwang-Yong Jeong, Babu Madavali, Gian Song, Young-Sang Na, Jong Woo Won, Hyoung-Seop Kim, Soon-Jik Hong, Applied Surface Science 549 (2021): 149202
19. Developing high-strength ferritic alloys reinforced by combination of hierarchical and laves precipitates, Kanghyun Park, Sung Ho Song, Sung Hwan Hong, Ki Buem Kim, Junhee Han, Kyoung-Tae Park, Chanho Lee, Peter K.Liaw, Gian Song, SoonJik Hong, Journal of Alloys and Compounds 856 (2021): 158162
20. Effect of heat treatment on magnetic properties of nanocomposite Nd-lean Nd7Fe73B20 ribbons, Seyit Caglar, M. Fatih Kilicaslan, Ahmet Atasoy, Hasan Tiryaki, Mustafa Erkovan & Soon-jik Hong, Journal of Materials Science: Materials in Electronics 32.2 (2021): 2338-2345
21. Modulating the electrical conductivity of a graphene oxide-coated 3D framework for guiding bottom-up lithium growth, Kwang Hyun Park, Dong Woo Kang, Jun-Woo Park, Jeong-Hee Choi, Sung Ho Song, Sang-Min Lee, Soon-Jik Hong, Janghyuk Moon and Byung Gon Kim, Journal of Materials Chemistry A 9.3 (2021): 1822-1834
22. Rare-earth hexaboride 2D nanostructures synthesis and coupling with NaAlH4 for improved hydrogen release, Hayk H.Nersisyan, Wan Bae Kim, Woo Seok Choi, Hwa-Young Woo, Jong Hyeon Lee, Soon-Jik Hong, Ceramics International 47.1 (2021): 877-888
23. Enhanced thermoelectric performance of Bi0.5Sb1.5Te3 composites through potential barrier scattering at heterogeneous interfaces, Peyala Dharmaiah, Kap-Ho Lee, Sung Ho Song, Hyoung Seop Kim, Soon-Jik Hong, Materials Research Bulletin 133 (2021): 111023
1. Formation of inhomogeneous micro-scale pores attributed ultralow κlat and concurrent enhancement of thermoelectric performance in p-type Bi0.5Sb1.5Te3 alloys, Cheenepalli Nagarjuna, Peyala Dharmaiah, Jong-Hyeon Lee, Ki Buem Kim, Gian Song, Jin Kyu Lee, Soon-Jik Hong, Journal of Alloys and Compounds 881 (2021): 160499
2. Investigation of phase-transformation path in TiZrHf (VNbTa) x refractory high-entropy alloys and its effect on mechanical property, Yunjong Jung, Kangjin Lee, Jin Kyu Lee, Junhee Han, Ki Buem Kim, Peter K. Liaw, Chanho Lee, Gian Song, Soon Jik Hong, Journal of Alloys and Compounds 886 (2021): 161187
3. Development of high-performance thermoelectric materials by microstructure control of p-type BiSbTe based alloys fabricated by water atomization, Babu Madavali, Pathan Sharief, Kyoung-Tae Park, Gian Song, Song-Yi Back, Jong-Soo Rhyee and Soon-Jik Hong, Materials 14.17 (2021): 4870
4. Development of coherent-precipitate-hardened high-entropy alloys with hierarchical NiAl/Ni2TiAl precipitates in CrMnFeCoNiAlxTiy alloys, Jong tae Kim, Jin Kyu Lee, Ki Buem Kim, Jong Hyeon Lee, Jun hee Han, Chan ho Lee, Gian Song, Soon Jik Hong, Materials Science and Engineering: A 823 (2021): 141763
5. Tuning of thermoelectric transport properties via the formation of hierarchical structures in Bi‐doped Gd2O3/Bi0.5Sb1.5Te3 nanocomposites, May Likha Lwin, Peyala Dharmaiah, Byeong Ho Min, Gi An Song, Kyeong Youl Jung, Soon-Jik Hong, International Journal of Energy Research 45.15 (2021): 20921-20933
6. Effect of mechanical alloying on the microstructural evolution of a ferritic ODS steel with (Y–Ti–Al–Zr) addition processed by Spark Plasma Sintering (SPS), E. Macía, A. García-Junceda, M. Serrano, M. Campos, S.J. Hong, Nuclear Engineering and Technology 53.8 (2021): 2582-2590
7. Synergetic effects of co-dispersed Cu and insulating HfO2 nanoparticles enabled high thermoelectric figure of merit in Bi0.5Sb1.5Te3 composites, Peyala Dharmaiah, Cheenepalli Nagarjuna, Pathan Sharief, Soon-Jik Hong, Applied Surface Science 556 (2021): 149783
8. Investigation of graphene dispersion on thermoelectric, magnetic, and mechanical properties of p-type Bi0.5Sb1.5Te3 alloys, Pathan Sharief, Babu Madavalia, Sung Ho Song, Jin Kyu Lee, Ki Buem Kim, Jong Tae Kim, Dong Hwan Kim, Jun-Hyun Han, Soon-Jik Hong, Materials Chemistry and Physics 266 (2021): 124512
9. Nano-scale structural evolution of quaternary AlCrFeNi based high entropy alloys by the addition of specific minor elements and its effect on mechanical characteristics, Elyorjon Jumaev, Muhammad Aoun Abbas, Sang Chul Mun, Gi an Song, Ki Buem Kim, Soon-Jik Hong, Journal of Alloys and Compounds 868 (2021): 159217
10. Simultaneous effects of deformation-induced plasticity and precipitation hardening in metastable non-equiatomic FeNiCoMnTiSi ferrous medium-entropy alloy at room and liquid nitrogen temperatures, Farahnaz Haftlang, Peyman Asghari-Rad, Jongun Moon, Alireza Zargaran, Kee-AhnLee, Hyoung SeopKim, Soon-JikHong, Scripta Materialia 202 (2021): 114013
11. Understanding the microstructure and mechanical properties of TaxAl0. 7CoCrFeNi2. 1 eutectic high entropy composites: multi-scale deformation mechanism analysis, Min JungKim, JeongTae Kim, Jumaev Elyorjon, Gyeol Chan Kang, Gian Song, JinKyu Lee, JongHyeon Lee, KiBuem Kim, SoonJik Hong, Composites Part B: Engineering 214 (2021): 108750
12. Effect of Powder Heat Treatment on Chemical Composition and Thermoelectric Properties of Bismuth Antimony Telluride Alloys Fabricated by Combining Water Atomization and Spark Plasma Sintering, Dong-won Shin, Peyala Dharmaiah, Jun-Woo Song and Soon-Jik Hong, Materials 14.11 (2021): 2993
13. Investigation of homogeneity in microstructure and thermoelectric properties at various positions in high-thickness sintered bulks of p-type 20% Bi2Te3–80% Sb2Te3 alloys, Babu Madavali, Chul-Hee Lee, Jin-Gu Han, Dong Hwan Kim, Jong Tae Kim, Gian Song, Jin Kyu Lee & Soon-Jik Hong, Journal of Materials Science: Materials in Electronics 32.12 (2021): 16302-16310
14. Powder characteristics of Al0.5CoCrFeMnNi high-entropy alloys fabricated by gas atomisation method, Yeeun Lee, Cheenepalli Nagarjuna, Jun-Woo Song, Kwang Yong Jeong, Gian Song, Jinkyu Lee, Jong-Hyeon Lee & Soon-Jik Hong, Powder Metallurgy 64.3 (2021): 219-227
15. Enhanced thermoelectric performance of Mo nanoparticle decorated n-type Bi2Te2. 7Se0.3 powder composites, Sang-Seok Lee, Injoon Jang, Jong-Soo Rhyee, SungJong Yoo, Il-Kyu Park, Soon-Jik Hong, Applied Surface Science 548 (2021): 149200
16. Reduction of Thermal Conductivity Through Complex Microstructure by Dispersion of Carbon Nanofiber in p-Type Bi0.5Sb1.5Te3 Alloys, Sharief, P., Madavali, B., Sohn, Y., Han, J. H., Song, G., Hong, S. J., Archives of Metallurgy and Materials 66 (2021)
17. AlN nucleation and spontaneous pattern formation via combustion of an Al-C-AlF3 mixture in nitrogen, Hayk H.Nersisyan, Thanh Nam huynh, Kyoung Tae Park, Jong Hyeon Lee, Soon-Jik Hong, Journal of Crystal Growth 560 (2021): 126044
18. Worn surface and subsurface layer structure formation behavior on wear mechanism of CoCrFeMnNi high entropy alloy in different sliding conditions, Cheenepalli Nagarjuna, Hyeon-Jeong You, Suseong Ahn, Jun-Woo Song, Kwang-Yong Jeong, Babu Madavali, Gian Song, Young-Sang Na, Jong Woo Won, Hyoung-Seop Kim, Soon-Jik Hong, Applied Surface Science 549 (2021): 149202
19. Developing high-strength ferritic alloys reinforced by combination of hierarchical and laves precipitates, Kanghyun Park, Sung Ho Song, Sung Hwan Hong, Ki Buem Kim, Junhee Han, Kyoung-Tae Park, Chanho Lee, Peter K.Liaw, Gian Song, SoonJik Hong, Journal of Alloys and Compounds 856 (2021): 158162
20. Effect of heat treatment on magnetic properties of nanocomposite Nd-lean Nd7Fe73B20 ribbons, Seyit Caglar, M. Fatih Kilicaslan, Ahmet Atasoy, Hasan Tiryaki, Mustafa Erkovan & Soon-jik Hong, Journal of Materials Science: Materials in Electronics 32.2 (2021): 2338-2345
21. Modulating the electrical conductivity of a graphene oxide-coated 3D framework for guiding bottom-up lithium growth, Kwang Hyun Park, Dong Woo Kang, Jun-Woo Park, Jeong-Hee Choi, Sung Ho Song, Sang-Min Lee, Soon-Jik Hong, Janghyuk Moon and Byung Gon Kim, Journal of Materials Chemistry A 9.3 (2021): 1822-1834
22. Rare-earth hexaboride 2D nanostructures synthesis and coupling with NaAlH4 for improved hydrogen release, Hayk H.Nersisyan, Wan Bae Kim, Woo Seok Choi, Hwa-Young Woo, Jong Hyeon Lee, Soon-Jik Hong, Ceramics International 47.1 (2021): 877-888
23. Enhanced thermoelectric performance of Bi0.5Sb1.5Te3 composites through potential barrier scattering at heterogeneous interfaces, Peyala Dharmaiah, Kap-Ho Lee, Sung Ho Song, Hyoung Seop Kim, Soon-Jik Hong, Materials Research Bulletin 133 (2021): 111023
Previous papers (1994~2020)
1. Grain refinement to improve thermoelectric and mechanical performance in n-type Bi2Te2.7Se0.3 alloys, Cheenepalli Nagarjuna, Peyala Dharmaiah, Ki Buem Kim, Soon-Jik Hong, Materials Chemistry and Physics 256 (2020): 123699
2. Recrystallization stimulated hierarchical structures for the simultaneous enhancement of Seebeck coefficient and electrical conductivity in Bi-Sb-Te alloys, Myeong-Won Lee, Peyala Dharmaiah, Chul-Hee Lee, Sung Ho Song, Jong-Hyeon Lee, Soon-Jik Hong, Journal of Alloys and Compounds 842 (2020): 155804
3. Fabrication of large-scale p-type 75% Sb2Te3-25% Bi2Te3 thermoelectric materials by gas atomization and hot isostatic pressing, Sang Min Yoon, Babu Madavali, Chul-Hee Lee, Olu Emmanuel Femi, Jong-Hyeon Lee, Sung Ho Song, Soon-Jik Hong, Materials Research Bulletin 130 (2020): 110924
4. Correlation with the composition of the different parts of p-type Bi0.5Sb1.5Te3 sintered bulks and their thermoelectric characteristics, May Likha Lwin, Peyala Dharmaiah, Suk-Min Yoon, Sung Ho Song, Hyoung Seop Kim, Jong-Hyeon Lee, Reza Ghomashchi, Soon-Jik Hong, Journal of Alloys and Compounds 845 (2020): 156114
5. 3D self-assemblies of β-Si3N4: Synthesis, characterization and growth mechanism, Hayk Nersisyan, Huynh Thanh Nam, Vladislav Ri, Hwa Young Woo, Soon-Jik Hong, Jong Hyeon Lee, Journal of Crystal Growth 549 (2020): 125866
6. Preparation and thermoelectric performance of nano rare-earth oxides dispersed p-type BiSbTe alloys by mechanical milling and spark plasma sintering, Babu Madavali, Dong-won Shin, Sung Ho Song, Dong-soo Kim, Jin Kyu Lee, Soon-Jik Hong, Materials Chemistry and Physics 253 (2020): 123378
7. Investigation of the magnetic properties and fracture behavior of Nd–Fe–B alloy powders during high-energy ball milling, Dong-won Shin, Babu Madavali, Dong-soo Kim, Jin-Young Lee, Min-chul Kang, Cheol-woong Yang, C Suryanarayana, and Soon-jik Hong, Materials Research Express 7.9 (2020): 096101
8. Highly luminescent polyethylene glycol-passivated graphene quantum dots for light emitting diodes, Hyun Jun Kim, Chung Kyeong Lee, Jin Gwan Seo, Soon Jik Hong, Gian Song, Junghoon Lee, Changui Ahn, Dong Ju Lee and Sung Ho Song, RSC Advances 10.46 (2020): 27418-27423
9. Influence of Spark Plasma Sintering Temperature on Microstructure and Tthermoelectric Properties of Cu-Doped Bi0. 5Sb1. 495Te3 Compound, Chul-Hee Lee, Peyala Dharmaiah, Jun-Woo Song, Kwang-Yong Jeong, Archives of Metallurgy and Materials 65 (2020)
10. Mechanical and thermoelectric properties of eutectic composite (Bi, Sb) 2Te3/Te thermoelectric material, Femi Emmanuel Olu, Soon-Jik Hong & Kamanio Chattopadhyay, Transactions of the Indian Institute of Metals 73.5 (2020): 1147-1155
11. Mechanical and thermoelectric properties of environment friendly higher manganese silicide fabricated using water atomization and spark plasma sintering, Peyala Dharmaiah, Chul-hee Lee, Gian Song, Soon-Jik Hong, Intermetallics 119 (2020): 106705
12. Experimental realization of heavily p-doped half-Heusler CoVSn compound, Sadeq Hooshmand Zaferani, Alireza Darebaghi, Soon-Jik Hong, Daryoosh Vashaee and Reza Ghomashchi, Energies 13.6 (2020): 1459
13. Effect of impact velocity on interface characteristics of ht-9 steel joints fabricated by magnetic pulse welding, Jun-Woo Song, Jin-Ju Park, Gyoung-Ja Lee, Min-Ku Lee, Kyu-Hyun Park, Soon-Jik Hong & Jung Gu Lee, Metals and Materials International 26.3 (2020): 360-369
14. Effect of Trace Elements (Co, Cr) on the Microstructure and Physical Properties of Al-Si-Cu-Mg-Fe Extruded Alloy, Ahn, S. S., Sharief, P., Lee, C. H., Son, H. T., Kim, Y. H., Kim, Y. C., Hong, S., Hong, S. J., Archives of Metallurgy and Materials 64.3 (2019): 857-862
15. Versatile and Tunable Electrical Properties of Doped Nonoxidized Graphene Using Alkali Metal Chlorides, Chung Kyeong Lee, Jin Gwan Seo, Hyun Jun Kim, Soon Jik Hong, Gian Song, Changui Ahn, Dong Ju Lee and Sung Ho Song, ACS applied materials & interfaces 11.45 (2019): 42520-42527
16. Reduction of thermal conductivity through the dispersion of TiC nanoparticles into a p-type Bi0. 5Sb1. 5Te3 alloy by ball milling and spark plasma sintering, Nagarjuna Cheenepalli, Madavali Babu, Lee Myeong-Won, Yoon Suk-Min, Hong Soon-Jik, Archives of Metallurgy and Materials 64 (2019)
17. Densification mechanism and its effect on the magnetic properties of Nd-Fe-B bonded magnets through the new high-energy compaction method, Dong-won Shin, Dong-soo Kim, Babu Madavali, Dong-hwan Kim, Jeong-gon Kim, Chul-Hee Lee, Suryanarayana Challapalli, Soon-jik Hong, Journal of Magnetism and Magnetic Materials 482 (2019): 280-286
18. Reduction of thermal conductivity in Al2O3 dispersed p-type bismuth antimony telluride composites, Babu Madavali, Haejin Kim, Soon-Jik Hong, Materials Chemistry and Physics 233 (2019): 9-15
19. Effect of milling time parameter on the microstructure and the thermoelectric properties of N-type Bi2Te2.7Se0.3 alloys, Sharief P., Madavali B., Koo J. M., Kim H. J., Hong S., Hong S.J., Archives of Metallurgy and Materials 64 (2019): 585-590
20. Fabrication and mechanical properties of TiC reinforced CoCrFeMnNi high-entropy alloy composite by water atomization and spark plasma sintering, Dami Yim, Praveen Sathiyamoorthi, Soon-Jik Hong, Hyoung Seop Kim, Journal of Alloys and Compounds 781 (2019): 389-396
21. Microstructure and Texture of P-Type Bi—Sb—Te Alloy by Using Gas-Atomization and Extrusion Processes, Son HyeonTaek, Yoo HyoSang, Kim YongHo, Lee ChulHee, Hong SoonJik, Journal of Nanoscience and Nanotechnology 19.4 (2019): 2236-2239
22. Formation mechanism of twin structures in p-type (Bi0.25Sb0.75)2Te3 thermoelectric compound, Kap Ho Lee, Peyala Dharmaiah, Soon-Jik Hong, Scripta Materialia 162 (2019): 437-441
23. Enhanced thermoelectric properties of Bi0.5Sb1.5Te3 composites with in-situ formed senarmontite Sb2O3 nanophase, Eun Bin Kim, Peyala Dharmaiah, Kap-Ho Lee, Chul-Hee Lee, Jong-Hyeon Lee, Jae-Kyo Yang, Dae-Hwan Jang, Dong-Soo Kim, Soon-Jik Hong, Journal of Alloys and Compounds 777 (2019): 703-711
24. Optimization of B2/L21 hierarchical precipitate structure to improve creep resistance of a ferritic Fe-Ni-Al-Cr-Ti superalloy via thermal treatments, Gian Song, Soon Jik Hong, Jin Kyu Leea, Sung Ho Song, Sung Hwan Hong, Ki Buem Kim, Peter K.Liaw, Scripta Materialia 161 (2019): 18-22
25. Enhanced thermoelectric properties by effective decoupling of electrical, thermal properties and seebeck coefficient through the addition of rare earth sesquioxides in p-type BiSbTe alloys, Babu Madavali, Dong-won Shin, Dong-Soo Kim, Soon-Jik Hong, Intermetallics 105 (2019): 139-145
26. High thermoelectric figure of merit in p-type (Bi2Te3) x−(Sb2Te3) 1− x alloys made from element-mechanical alloying and spark plasma sintering, Babu Madavali, Hyo-Seob Kim, Chul-Hee Lee, Dong-soo Kim & Soon-Jik Hong, Journal of Electronic Materials 48.1 (2019): 416-424
27. Microstructure and Texture of P-Type Bi–Sb–Te Alloy by Using Gas-Atomization and Extrusion Processes, Hyeon-Taek Son, Hyo-Sang Yoo, Yong-Ho Kim, Chul-Hee Lee and Soon-Jik Hong, Journal of Nanoscience and Nanotechnology, 18 (2018) 1-4
28. Enhanced thermoelectric properties of Bi0.5Sb1.5Te3 composites with in-situ formed senarmontite Sb2O3 nanophase, Eun Bin Kim, Peyala Dharmaiah, Kap-Ho Lee, Chul-Hee Lee, Jong-Hyeon Lee ,Jae-Kyo Yang, Dae-Hwan Jang, Dong- Soo Kim, Soon-Jik Hong, Journal of alloys and compound, 777(2019) 703-711
29. Optimization of B2/L21 hierarchical precipitate structure to improve creep resistance of a ferritic Fe-Ni-Al-Cr-Ti superalloy via thermal treatments, Gian Song, Soon-Jik Hong, Jin-Kyu Lee, Sung-Ho Song, Sung-Hwan Hong, Ki Buem Kim, Peter K.Liaw, Scripta Materialia, 161(2019) 18-22
30. Oxide formation mechanism and its effect on the microstructure and thermoelectric properties of p-type Bi0.5Sb1.5Te3 alloys, Intermetallics, May Likha Lwin, Peyala Dharmaiah, Babu Madavali, Chul-Hee Lee, Dong-won Shin, Gian Song, Kap-Ho Lee, Soon-Jik Hong, 103(2018) 23-32
31. Effect of Bismuth on hydrogen storage properties of melt-spun LaNi4.7-x Al0.3Bix (x = 0.0, 0.1, 0.2, 0.3) ribbons, International Journal of hydrogen energy, 43(2018) 20243-20251
32. Compaction behavior of water-atomized CoCrFeMnNi high-entropy alloy powders, Dami Yim, Min Ji Jang, Jae Wung Bae, Jongun Moon, Chul-Hee Lee, Soon-Jik Hong, Sun Ig Hong, Hyoung Seop Kim, Materials Chemistry and Physics, 210 (2018) 95-102
33. Domain structure analysis of (AgSbTe2)15(GeTe)85 thermoelectric compounds fabricated by rapid solidification process (PSP) and spark plasma sintering (SPS), K.H. Lee, S.J. Hong, Scripta Materialia, 137 (2017) 55-59
34. Large-scale production of (GeTe)x(AgSbTe2)100−x (x=75, 80, 85, 90) with enhanced thermoelectric properties via gas-atomization and spark plasma sintering, H.S. Kim, P. Dharmaiah, B. Madavali, R. Ott, S.J. Hong, Acta Materialia, 128 (2017) 43-53
35. Enhanced Seebeck Coefficient by Energy Filtering in Bi-Sb-Te Based Composites With Dispersed Y2O3 Nanoparticles, M. Babu, H.S Kim, K.H. Lee, S.J. Hong, Intermetallics, 82 (2017) 68-75
36. Structure and Properties of Ultrafine-Grained CocrFeMnNi High-Entropy Alloys Produced by Mechanical Alloying and Spark Plasma Sintering, S.H. Joo, H. Kato, M.J. Jang, J. Moon, E.B. Kim, S.J. Hong, H.S. Kim, Journal of Alloys and Compounds, 698 (2017) 591-604
37. Investigation of Microstructure and Thermoelectric Properties at Different Positions of Large Diameter Pellets of Bi0.5Sb1.5Te3 Compound, K.C. Park, P. Dharmaiah, H.S. Kim, S.J. Hong, Journal of Alloys and Compounds, 692 (2017) 573-582
38. Studies on Microstructure and Thermoelectric Properties of p-Type Bi-Sb-Te Based Alloys by Gas Atomization and Hot Extrusion Processing, K.C. Park, B. Madavali, E.B. kim, K.W. Koo, S.J. Hong, Journal of ELECTRONIC MATERIALS, 46 (2017) 2915-2920
39. Thermoelectric Properties of Bi2Te3 Nanocrystals with Diverse Morphologies Obtained via Modified Hydrothermal Metho, p. Dharmaiah, S.J. Hong, Journal of ELECTRONIC MATERIALS, 46 (2017) 3012-3019
40. Investigation of Thermoelectric Properties with Dispersion of Fe2O3 and Fe-85Ni Nanospheres in Bi0.5Sb1.5Te3 Matrix, S.M. Yoon, p. Dharmaiah, H.S Kim, C.H Lee, S.J. Hong, J.M. Koo, Journal of ELECTRONIC MATERIALS, 46 (2017) 2770-2777
41. Investigation of Spark Plasma Sintering Temperature on Microstructure and Thermoelectric Properties of p-type Bi-Sb-Te alloys, J.K. Han, D.W. Shin, B. Madavali, S.J. Hong, J. Korean Powder Metall, 24 (2017) 115-121
42. Optimization of Spark Plasma Sintering Temperature Conditions for Enhancement of Thermoelectric Performance in Gas-Atomized Bi0.5Sb1.5Te3 Compound, K.Y. Jeong. C.H. Lee, P. Dharmaiah, S.J. Hong, J. Korean Powder Metall, 24 (2017) 108-114
43. Enhanced thermoelectric performance through carrier scattering at spherical nanoparticles in Bi0.5Sb1.5Te3/Ta2O5 composites, E.B. Kim, P. Dharmaiah, D.W. Shin, K.H Lee, S.J. Hong, Journal of Alloys and Compounds, 703 (2017) 614-623
44. Effect of Ni carbon-coated Ni addition on the thermoelectric properties of 25Bi2Te3+75Sb2Te3 base composites, S.M. Yoon, P. Dharmaiah, O.E. Femi, C.H. Lee, S.J. Hong, Materials Chemistry and Physics, 195 (2017), 49-57
45. Enhanced thermoelectric figure-of-merit in Bi-Sb-Te nanocomposites with homogenously dispersed oxide ceramic ZrO2 nanoparticles, B. Madavali, H.S. Kim, S.J. Hong, JOURNAL OF APPLIED PHYSICS, 121 (2017) 225104
46. Separation behavior of impurities and selenium reduction by the reactive zone refining process using high-frequency induction heating to purify Te, M.S Shim, Y.M. Kim, H.H. Lee, S.J. Hong, J.H. Lee, Journal of Crystal Growth, 455 (2016) 6-12
47. Luminescence and Energy Transfer in Dy3+/Tb3+ Co-Doped Transparent Oxyfluorosilicate Glass–Ceramics for Green Emitting Applications, P. Dharmaiah, C.S. Dwaraka Viswanath, Ch. Basavapoornima, K.V. Krishnaiah, C.K. Jayasankar, S.J. Hong, Materials Research Bulletin, 83 (2016) 507-514
48. Enhanced thermoelectric cooling properties of Bi2Te3-xSex alloys fabricated by combining casting, milling and spark plasma sintering, S.T. Han, P. Rimal, C.H. Lee, H.S. Kim, S.J. Hong, Intermetallics, 78 (2016) 42-49
49. Influence of powder size on thermoelectric properties of p-type 25%Bi2Te3 single bond-75%Sb2Te3 alloys fabricated using gas-atomization and spark-plasma sintering, P. Dharmaiah, H.S. Kim, C.H. Lee, S.J. Hong, Journal of Alloys and Compounds, 686 (2016) 1-8
50. Effects of Bi2Se3 Amount in Thermoelectric Performance of Bi2(TeSe)3 Materials Fabricated by High-Energy Ball Milling, P. Rimal, S.T. Han, S.J. Hong, K.Y. Cho, I. Lee, J. Appl. Ceram. Technol, 13 (2016) 711-717
51. Large Scale Production of High Efficient and Robust P-Type Bi-Sb-Te Based Thermoelectric Materials by Powder Metallurgy, M.Babu, H.S. Kim, K.H. Lee, Y. Isoda, F. Gascoin, S.J. Hong, Materials and Design, 112 (2016) 485-494
52. Technology Trend Analysis of Co2 Solvent by Pantent Information, Y.S. Lee, S.j. lee, J.G. Lee, S.J. Hong, J. of Korean Society for Heat Treatment, 28 (2015) 251-257
53. Effects of Hydrogen Reduction in Microstructure, Mechanical and Thermoelectric Properties of Gas Atomized n-type Bi2Te2.7 Se0.3 Material, P. Rimal, S.M. Yoon, E.B. Kim, C.H. Lee, S.J. Hong, J. Korean Powder Metall. 23 (2016) 126-131
54. Investigation of Ball Size Effect on Microstructure and Thermoelectric Properties of p-type BiSbTe by Mechanical Alloying, M.L. Lwin, S.M. Yoon, B. Madvali, C.H. Lee, S.J. Hong, J. Korean Powder Metall, 23 (2016) 120-125
55. Enhanced Thermoelectric Properties of p-type Bi0.5Sb1.5Te3 Thermoelectric Materials by Mechanical Alloying and Spark Plasma Sintering, B. Madavali, S.J. Hong, Journal of ELECTRONIC MATERIALS, 45 (2016) 6059-6066
56. Effect of Milling Time on the Microstructure and Thermoelectric Properties of P-type TAGS-90 Alloys by HEM and SPS, H.S. Kim, B. Madavali, S.J. Hong, T.S. Kim, J. Appl. Ceram. Technol, 13 (2016) 239-244
57. Effect of Sintering Temperature on Thermoelectric Properties of p-Bi2Te3 Alloys Produced by Gas Atomization, B. Madavali, H.S. Kim, G.C. Park, J.M. Koo, S.J. Hong, H.T. Son, J. Appl. Ceram. Technol, 13 (2016) 245-251
58. Influence of Applied Pressure Load and Holding Time on Microstructure and Thermoelectric Properties of p-Type Bi2Te3 Alloys, B. Madavali, H.S. Kim, S.J. Hong, K.H. Lee, H.T. Son, J. Appl. Ceram. Technol, 13 (2016) 252-257
59. Fabrication of Zn4Sb3 Alloys by a Combination of Gas-Atomization and Spark Plasma Sintering Processes, P. Dharmaiah, H.S. Kim, K.H. Lee, S.J. Hong, Archives of Metallurgy and Materials, 60 (2015) 1417-1421
60. Effect of Ti Powder Addition on the Fabrication of TiO2 Nano-Powders, R.M. Raihanuzzaman, H.Y. Park, R. Ghomashchi, T.H. Kwon, H.T. Son, S.J. Hong, Archives of Metallurgy and Materials, 60 (2015) 1473-1477
61. Microstructure and Thermoelectric Properties of TAGS-90 Compounds Fabricataed by Mechanical Milling Process, H.S. Kim, M. Babu, S.J. Hong, Archives of Metallurgy and Materials, 60 (2015) 1231-1234
62. Effect of Different Mechanical Milling Processes on Morphology and Microstructural Changes of Nano and Micron Al-Powders, H.S. KIM, M. Babu, T.J. Eom, C.M. Kim, J.M. Koo, T.H. Lee, S.J. Hong, Archives of Metallurgy and Materials, (2015) 1235-1239
63. Effect of Spark Plasma Sintering Pressure on Mechanical Properties of WC-7.5 wt.% Nano Co, M.R. Raihanuzzaman, Z. Xie, S.J. Hong, R. Ghomashchi, Materials and Design, 68 (2015) 221-227
64. Spark Plasma sintering of WC-Co tool materials prepared with emphasis on WC core-Co shell structure development, S.K. Lee, H.S. Hong, H.S. Kim, S.J. Hong, J.H. Yoon, Journal of Refractory Metals and Hard Materials, 53 (2015) 41-45
65. Conventional sintering of WC with nano-sized Co binder: Characterization and mechanical behavior, R.M. Raihanuzzaman, S.T. Han, R. Ghomashchi, H.S. Kim, S.J. Hong, Journal of Refractory Metals and Hard Materials, 53 (2015) 2-6
66. Fabrication of GaN nanowires by a vapor–liquid–solid method using metal–organic chemical vapor deposition, J.Y. Yang, J.S. Yoon, B.S. O, C.S. Kim, S.J. Hong, H.S. Hong, J.M. Lee, Japanese Journal of Applied Physics, 54 (2015) 02BD03
67. Electromagnetic Wave Shielding Effect of Nano-powder Dispersed Epoxy Resin Composite, J.Y. Han, C.H. Lee, M.G. Choi, S.J. Hong, J.H. Park, D.J. Lee, J. Korean Powder Metall, 22 (2015) 234-239
68. Characterization of the Structural Modulations in n-type Bi2 (Te0.95Se0.05)3 Thermoelectric Compound, S.H. Yoon, K.H. Lee, S.J. Hong, Korean J. Met. Mater, 53 (2015) 123-132
69. Technology Trend Analysis of CO2 Capture and Storage by Patent Information, S.J. Lee, Y.S. Lee, J.G. Lee, S.J. Hong, J.B. Lee, J. Korean Powder Metall, 22 (2015) 289-297
70. Characterization of Short-Duration High-Energy Ball Milled WC-Co Powders and Subsequent Consolidations, M.R. Raihanuzzaman, T.S. Jeong, R. Ghomashchi, Z. Xie, S.J. Hong, Journal of Alloys and Compounds, 615 (2014) S564-S568
71. Thermally Decomposition of High Quality Flower-Like ZnO Nanorods from Zinc Acetate Dehydrate, M. Babu, H.S. Kim, S.J. Hong, Materials Letters, 132 (2014) 342-345
72. Powder Refinement, Consolidation and Mechanical Properties of Cemented Carbides, R.M. Raihanuzzaman, Z. Xie, R. Ghomashchia, S.J. Hong, Powder Technology, 261 (2014) 1-13
73. Effect of Chemical Composition on the Thermoelectric Properties of N-Type Bi2Te3 Alloys Fabricated by Gas Atomization and Hot Extrusion, M. Babu, H.S. Kim, S.J. Hong, Journal of Electronic Materials, 43 (2014) 2390-2396
74. Thermoelectric Properties of N-Type Bi2Te3 Alloys Produced by a Combined Process of Magnetic Pulsed Compaction (MPC) and Spark Plasma Sintering (SPS), C.H. Lee, M. F. Kilicaslan, M. Babu, S.J. Hong, Research on Chemical Intermediates, 40 (2014) 1-9
75. Refinement Behavior of Scrap Silicon by Mechanical Milling, R.M. Raihanuzzaman, J.W. Song, I. Lee, S.J. Hong, J.M. Koo, Currenct Nanoacience, 10 (2014) 441-444
76. Preparation of Te Nanopowder by Vacuum Distillation, W.G. Kim, H. Li, B.U. Yoo, H.H. Lee, S.J. Hong, S.H. Kim, J.H. Lee, Powder Technology, 256 (2014) 204-209
76. Effects of Atmosphere and Milling Time on the Coarsening of Copper Powders During Mechanical Milling, M. Babu, J.H. Lee, J.K. Lee, K.Y. Cho, C. Suryanarayana, S.J. Hong, Powder Technology, 256 (2014) 251-256
77. Characteristics of Machined Surface Layer of Cemented Carbide by Wire Electrical Discharge Machine, W.G. Sim, J.W. Song, K.S. Kim, S.J. Hong, Current Nanoscience, 10 (2014) 56-61
78. The Effect of Sc on the Microstructure and Mechanical Properties of Hypereutectic Al-Si Alloy Fabricated by a Gas Atomization Process, T.H. Lee, H.J. Ko, T.S. Jeong, S.J. Hong, Currenct Nanoacience, 10 (2014) 146-150
79. Effect of Micro Ti and Tio2-P-25 Nanopowder Addition on Mechanical Properties of Tio2 Nanopowders, H.Y. Park, R.M. Raihanuzzama, H.J. Ko, J.M. Park, Y.C. Kim, S.J. Hong, Current Nanoscience, 10 (2014) 3-6
80. Characteristics of Niobium Powder Used Capacitors Produced by Metallothermic Reduction in Molten Salt, J.S. Yoon, G.H. Lee, H.S. Hong, C.G. Lee, J.M. Lee, S.J. Hong, Current Nanoscience, 10 (2014) 131-134
81. Microstructure and Thermoelectric Properties of N-Type 95%Bi2Te3-5%Bi2Se3 Compound Prepared by High Energy Milling and Hot Extrusion, H.S. Kim, S.J. Hong, Current Nanoscience, 10 (2014) 118-122
82. Mechanical Properties of WC-Co Alloys With Various Mixing and Milling Conditions Using High Energy Ball Miller, J.W. Song, R.M. Raihanuzzaman, S.J. Hong, Current Nanoscience, 10 (2014) 62-65
83. Thermoelectric Properties of N-Type 95%Bi2Te3-5%Bi2Se3 Compounds Fabricated by Gas-Atomization and Spark Plasma Sintering, H.S. Kim, S.J. Hong, Journal of Alloys and Compounds, 586 (2014) S428-431
84. Numerical Analysis and Experimental Validation of Distillation Process for Purification of Tellurium, H. Li, W.G. Kim, B.W. Yoo, K.T. Park, H.H. Lee, J.C. Choi, S.J. Hong, M.S. Kong, H.Y. Lee, J.H Lee, Separation Science and Technology, 49 (2014) 197-208
85. Sliding Wear Resistance of Fine Co Powders Compacted by Magnetic-Pulsed Compaction Method, Fikretyilmaz, S.J. Hong, Wear, 306 (2013) 179-184
86. Densification Behaviour Analysis of Zro2 Nanopowders for Dental Applications Compacted by Magnetic Pulsed Compaction, H.Y. Park, M. Faith, S.J. Hong, Materials Chemistry and Physics, 141 (2013) 208-215
87. Microstructure and Microhardness of Melt-Spun Al-25Si-5Fe-XCo (X=0, 1, 3, 5) Alloys, M. Fatih, F. Yilaz. S. Ergen, O. Uzun, S.J. Hong, Materials Characterization, 77 (2013) 15~22
88. Mechanical Milling Behavior and Characteristics of Bi2Te3 Thermoelectric Materials, M. Babu, H.S. Kim, H.Y. Kim, S.J. Hong, Practical Metallography, 50 (2013) 143-153
89. Preparation of Niobium Powders for Solid Electrolyte Capacitors Through Hunter Process Using Metallothermic Reduction Method, J.S. Yoon, J.Y. Yang, J.M. Lee, S.J. Hong, Materials Transactions, 54 (2013) 114-118
90. A Development of the Led Tmga Precursor Reuse Technology, J.S. Yoon, J.Y. Yang, J.M. Lee, H.S. Hong, S.J. Hong, Materials Letter, 93 (2013) 153-156
91. Characteristics of Gan Nanowires Produced Using the VLS Method on the Growth Temperature, J.Y. Yang, B.S. Oh, C.S. Kim, J.K. Kim, J.S. Yoon, S.J. Hong, ECS Transactions, 50 (2013), 469-477
92. Trends in Development of Recycle Technology of Used Display Panel, 26 (2013) 28-42(Domestic)
93. Investigation of Material Flow and Industrial Trend of Domestic Europium, H.J. Ko, J.G. Kim, I.S. Lee, H.Y. Kang, S.J. Hong, Journal of Korean Powder Metallurgy Institution, 20 (2013) 382-387 (Domestic)
94. Analysis on the Impact of Composite by Using FEM, S.S. Kim, Y.C. Kim, J.H. Kook, S.H. Kim, J.U. Cho, S.J. Hong, the Korea Academia - Industrial Cooperation Society, 14 (2013) 542-547 (Domestic)
95. The Effect of Milling Conditions for Dissolution Efficiency of Valuable Metals from PDP Waste Panels, H.S. Kim, C.M. Kim, C.H. Lee, S.K. Lee, H.S. Hong, J.M. Koo, S.J. Hong, 20 (2013) 107-113(Domestic)
96. The Effect of Milling Conditions for Dissolutions Efficiency of Valuable Metals from PDP Waste Panels, H.S. Kim, C.M. Kim, C.H. Lee, S.K. Lee, H.S. Hong, J.M. Koo, S.J. Hong, Journal of Korean Powder Metallurgy Institution, 20 (2013) 107-113 (Domestic)
97. Recovery of Indium from Used LCD Panel by a Time Efficient and Environmentally Sound Method Assisted HEBM , C.H. Lee, M.F. Kilicaslan, M.K. Jung, J.H. Lee, H.S. Hong, J.M. Koo, S.J. Hong, Waste Management, 33 (2012) 730-734
98. Fabrication of Cobalt Nano-Particles by Pulsed Wire Evaporation Method in Nitrogen Atmosphere, F. Yilmaz, D.J. Lee, J.W. Song, H.S. Hong H.T. Son, J.S. Yoon, S.J. Hong, Powder Technology, 235 (2012) 1047-1052
99. Effect of Co on Si and Fe-Containing Intermetallic Compounds (IMCS) in Al-20Si-5Fe Alloys, M.F. Kilicaslan, F. Yilmaz, S.J. Hong O. Uzun, Materials Science & Engineering a, A556 (2012) 716-721
100. Effects of Substitution of Al and Bi for Ni on Structure and Hydrogen Storage Properties of LaNi4.7-XAl0.3Bix (X = 0.1, 0.2, 0.3) Alloy, F. Yilmaz, M.F. Kilicaslan, O.M. Atanur, S.J. Hong, O. Uzun, Japanese Journal of Applied Physics 51 (2012) 09mb01-1~4
101. Evaluation of Mechanical Properties of WC-Co Alloys Fabricated by Magnetic Pulsed Compaction, R.M. Raihanuzzaman, J.W. Song, H.S. Hong, S.J. Hong, Journal of Alloys and Compounds, 536s (2012) S211-S215
102. Refinement Behavior of Scrap Silicon by Mechanical Milling, J.W Song, R.M. Raihanuzzaman, S. H. Lee, Y.C. Kim, H.S. Kim, S.J. Hong, Journal of Alloys and Compounds, (2012) in Press
103. Fabrication of Al-20wt%Si Powder Using Scrap Si by Ultra High-Energy Milling Process, W. K. Kang, F. Yilmaz, H.S. Kim, J.K. Lee, J.M. Koo, S.J. Hong, Journal of Alloys and Compounds, 536s (2012) S45-S49
104. Impact Fracture Behavior at the Material of Aluminum Foam, J.U. Cho, S.J. Hong, S.K. Lee, C.D. Cho Materials Science and Engineering a 539 (2012) 250-258
105. Effect of Multiple Pressures by Magnetic Pulsed Compaction (MPC) on the Density of Gas-Atomized Al-20Si Powder, H.Y. Park, M.F. Kilicaslan, S.J. Hong, Powder Technology 224 (2012) 360-364
106. Wear Behavior of Al-Fe-Cr-Ti Alloys Fabricated by Magnetic Pulsed Compaction, M.R. Raihanuzzaman, J.H. Kim, J.K. Lee, J.S. Yoon, H.T. Son, S.J. Hong, Powder Technology 225 (2012) 227-231
107. Highly Dense Steel Components Prepared by Magnetic Pulsed Compaction of Iron-Based Powders, J.G. Lee, C.H. Lim, H.S. Kim, S.J. Hong, M.T. Kim, B.C. Kang, D.K. Park, M.K. Lee, C.K. Rhee, Powder Technology 228 (2012) 254-257
108. Effect of Variation in Voltage on the Synthesis of Ag Nano-Powder by Pulsed Wire Evaporation, J.W. Song, D.J. Lee, F. Yilmaz, S.J. Hong, Journal of Nanomaterials, 792429 (2012) 1-5
109. Fabrication of Ceramic Dental Block by Magnetic Pulsed Compaction, H.Y. Park, H.S. Kim, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 19 (2012) 373-382 (Domestic)
110. Industrial Supply Chain Trend of Domestic Tungsten, J.W. Song, S.H. Lee, H.S. Hong, H.Y. Kang, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 19 (2012) 79-86 (Domestic)
111. Recycling Technology and Status of Tellurium Materials, H.S Kim, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 19 (2012) 232-238 (Domestic)
112. Fabrication of Fe Coated Mg Based Desulfurization Powder by Mechanical Alloying Process, J.W. Song, O. Gullermo, B.S. Chun, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 19 (2012) 226-231 (Domestic)
113. Effect of Sc Addition on the Microstructure and Mechanical Properties of As-Atomized and Extruded Al-20Si Alloys, M.F. Kilicaslan, W.R. Lee, T.H. Lee, Y.H. Shon, S.J. Hong, Materials Letter, 71 (2011) 164-167
114. Effect of Magnetic Pulsed Compaction (MPC) on Sintering Behavior of Materials, S.J. Hong, R.M. Raihanuzzaman, in Tech Publication Croatia (2011) Sintering Chapter 10
115. Synthesis and Characterization of Agglomerated Coarse Al Powders Comprising Nanoparticles by Low Energy Milling Process, N. Eom, M.H. Bhuiyan, S.J. Hong, Materials Transaction, 52 (2011) 1674-1678
116. Fabrication and Densification Behavior Analysis of Metalizing Targets Using ZrO2 Nanopowders by Magnetic Pulsed Compaction, J.H. Kim, R.M. Rumman, J.K. Lee, M.K. Lee, C.K. Rhee, H.S. Kim, S.J. Hong, Materials Transaction, 52 (2011) 1156-1162
117. The Effects of Electron Beam Irradiation Direction on Mechanical Properties and Microstructural Characteristics of Thick Al 5052 Alloys Plate, I.H. Kim, B.S. Chun, S.J. Hong, Metals and Materials International, 17 (2011) 357-363
118. Microstructural Behavior of the Heat Treated N-Type 95% Bi2Te3–5% Bi2Se3 Gas Atomized Thermoelectric Powders, M.H. Bhuiyan, T.S. Kim, J.M. Koo, S.J. Hong, Journal of Alloys and Compounds, 509 (2011) 1722-1728
119. Corrosion of Ti-STS Dissimilar Joints Brazed by a Ag Interlayer and Ag-Cu-(Pd) Alloy Fillers, M.K. Lee, J.J. Park, G.J. Lee, D.W. Kim, C.H. Lim, C.K. Rhee, Y.B. Lee, J.K. Lee, S.J. Hong, Journal of Nuclear Materials, 409 (2011) 183-187
120. Optimization of Surface Roughness by Taguchi Design Method, R.M. Rumman, S.J. Hong, Advanced Materials Research, 156-157 (2011) 392-395
121. Fabrication and Characterization of Micro-Sized Copper Bump of Multi-Layer PCD by Pulse-Reverse Electroplating, H.S. Hong, M.H. Seo, S.K Lee, S.J. Hong, H.G. Suk, J.H. Ahn, Current Applied Physics 11 (2011) S289-S292
122. Microstructure and Characteristics of Ag-SnO2 Contact Materials Prepared by Magnetic Pulsed Compaction, J.S. Park, Y.J. Kim, M.H. Lee, H.S. Lee, J.K. Lee, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 18 (2011) 372-377 (Domestic)
123. Synthesis and Characterization of (AgSbTe2)15(GeTe)85 Thermoelectric Powder by Gas Atomization Process, H.S. Kim, J.K. Lee, J.M. Koo, B.S. Cheon, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 18 (2011) 449-455 (Domestic)
124. Characteristic of Indium Dissolution of Waste LCD Panel Powders Fabricated by High Energy Ball Milling (HEBM) Process With Milling Time, H.S. Kim, J.J. Sung, C.H. Lee, H.S. Hong, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 18 (2011) 378-384 (Domestic)
125. Fabrication of an Yttria Thin-Wall Tube by Radial Magnetic Pulsed Compaction of Powder-Based Tapes, J.G. Lee, S.J. Hong, J.J. Park, M.K. Lee, V.V. Ivanov, C.K. Rhee, Materials Transactions a, 51 (2010) 1689-1693
126. Recycling of the Indium Scrap from Ito Sputtering Waste, H.S. Hong, H.C. Jung, S.J. Hong, Research on Chemical Intermediates, 36 (2010) 761-766
127. High Energy Ball-Mill Behavior of Titania + Hydroxyapatite Composite Nano-Powders, J.G. Lee, S.M. Hong, J.J. Park, M.K. Lee, U.H. Joo, C.K. Lee, S.J. Hong, Materials Characterization, 61 (2010) 1290-1293
128. Interlayer Engineering for Dissimilar Bonding of Titanium To Stainless Steel, C.K. Rhee, M.K. Lee, J.K. Lee, Y.H. Choi, D.W. Kim, Y.B. Lee, S.J. Hong, Materials Letters, 64 (2010) 1105-1108
129. Densification of Tio2 Nanopowder by Magnetic Pulsed Compaction, H.S. Kim, J.K. Lee, C.K. Rhee, S.J. Hong, Materials Transaction, 51 (2010) 578-581
130. Etching Effect on Microstructural Behavior of Gas Atomized Al-20Si Alloy Powder, S.J. Hong, Materials Transaction, 51 (2010) 1055-1058
130. Fatigue Characteristics of High Strength C70S6 and SMA40 Steels, H.S. Kim, T.G. Kim, H.S. Kim, S.J. Hong, Materials Science and Engineering A, 527 (2010) 2813-2818
131. Consolidation of Mixed Diamond and Cobalt Granule Powders by Magnetic Pulsed Compaction, J.G. Lee, M.K. Lee, S.J. Hong, H.W. Lee, S.P. Pyun, C.K. Rhee, Materials Letters, 64 (2010) 35-37
132. Thermoelectric Properties of Rapid Solidified P-Type Bi2Se3 Alloy Fabricated by Spark Plasma Sintering (SPS) Process, C.D. Moon, D.H. Kim, T.S. Kim, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 17 (2010) 494-498 (Domestic)
133. Phase Transformation and Microstructure of FeSi2 Thermoelectric Compounds Manufactured by Powder Metallurgy, K.T. Park, J.G. Shin, B.S. Chun, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 17 (2010) 482-488 (Domestic)
134. Refinement Behavior of Coarse Magnesium Powder by High Energy Ball Milling, J.W. Song, H.S. Kim, H.M. Kim, T.S. Kim, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 17 (2010) 302-311 (Domestic)
135. Effect of Initial Silicon Scrap Size on Powder Refining Process During High Energy Ball Milling (HEBM), J.W. Song, H.S. Kim, S.S. Kim, J.M. Koo, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 17 (2010) 242-250 (Domestic)
136. Recycling Technology for End-of-Life LCD Units, H.M. Lee, H.S. Hong, H.C. Jung, H.Y. Kang, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 17 (2010) 88-100 (Domestic)
137. Pre-Compaction Effects on Density and Mechanical Properties of Al2O3nanopowder Compacts Fabricated by Magnetic Pulsed Compaction. S.J. Hong, J.G. Lee, M.K. Lee, C.K. Rhee, Materials Transaction, 50 (2009) 2885-2890
138. Microstructure and Mechanical Properties of Al-Si-X Alloys Fabricated by Gas Atomization and Extrusion Process, T.H. Lee, S.J. Hong, Journal of Alloys and Compounds, 487 (2009) 218-224
139. High Strength Bonding of Titanium To Stainless Steel Using an Ag Interlayer, J.G. Lee, S.J. Hong, M.K. Lee, C.K. Rhee, Journal of Nuclear Materials 395 (2009) 145-149
140. Interpretation of X-Ray Diffraction Analysis and Tem Microstructure of MA’ed Powders With Peritectic Reaction, T.S. Kim, H.S. Kim, T.G. Kim, H.G. Jeong, S.J. Hong, Journal of Alloys and Compounds, 483 (2009) 593-596
141. Recycling Technology of Rare Metals and Related Industrial Trend, H.S. Hong, S.K. Lee, G.H. Kim, T.S. Kim, H.Y. Kang, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 16 (2009) 379-388 (Domestic)
142. Effect of Ball Milling on Graphite Dispersion and Mechanical Properties in Rapidly Solidified 6061 Al Composite, H.T. Son, J.S. Lee, B.S. Chun, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 16 (2009) 209-216 (Domestic)
143. The Effect of Ti Powder Addition on Compaction Behavior of Tio2 Nano Powder, J.S. Park, H.S. Kim, K.S. Lee, J.G. Lee, C.K. Rhee, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 16, (2009) 223-230 (Domestic)
144. Thermal Stability, Microstructure and Mechanical Properties of Nanostructured Al-Ni-Mm-X(X=Cu and Fe) Alloys Hot-Extruded from Gas-Atomized Powders, H.S. Kim, T.K. Kim, Y.H. Shon, S.J. Hong, Materials Transaction 49 (2008) 1223-1228
145. Densification of Tio2 Nano Powder by Magnetic Pulsed Compaction, H.S. Kim, J.G. Lee, C.K. Rhee, J.M. Koo, S.J. Hong, Korean Journal of Materials Research, 18 (2008) 411-416 (Domestic)
146. Magnetic Pulsed Compaction of Ferromagnetic Nano-Powders for Soft-Magnetic Core, S.J. Hong, G.H. Lee, C.K. Rhee, W.W. Kim, K.S. Lee, Materials Science and Engineering: A, 449-451 (2007) 401-406
147. Suspension Polymerization and Characterization of Transparent Poly (Methyl Methacrylate-Co-Isobornyl Methacrylate), S.I. Park, S.I. Lee, S.J. Hong, K.Y. Cho, the Polymer Society of Korea, 15, (2007) 418-423
148. Synthesis and Characterization of Nanoparticles of ZnO by Levitational Gas Condensation, Y.R. Uhm, B.S. Han, S.J. Hong, M.K. Lee, C.K. Rhee, Materials Science and Engineering: a, 449-451, (2007) 813-816
149. Consolidation and Mechanical Properties of Near-Net-Shape Al21 Wt% Si Component Fabricated by Plasma Spray Forming, S.J. Hong, S. Patil, C.K. Rhee, S. Seal, Solid State Phenomena, 119, (2007) 183-186
150. Mechanical Properties of Equal Channel Angular Pressed Powder Extrudates of a Rapidly Solidified Hypereutectic Al-20wt% Si Alloy, S.C. Yoon, S.J. Hong, S.I. Hong, H.S. Kim, Materials Science and Engineering: A, 449-451 (2007) 966-970
151. The Mechanical Milling Behavior of Ductile Cu Flakes When Using Ultrafine Al2O3 Reinforcements, M.K. Lee, G.H. Kim, S.M. Hong, J.K. Lee, S.J. Hong, Y.R. Uhm, C.K. Rhee, Solid State Phenomena, 119, (2007) 179-182
152. Fabrication of High-Density Nanostructured Alumina by the Combined Processes of Magnetic Pulsed Compaction(MPC) and Spark Plasma Sintering(SPS), J.K. Lee, S.J. Hong, M.K. Lee, C.K. Rhee, Solid Stage Phenomena, 118, (2006) 597-602
153. Consolidation of Al2O3 Nanopowder by Magnetic Pulsed Compaction and Sintering, S.J. Hong, J.K. Lee, M.K. Lee, W.W. Kim, C.K. Rhee, Solid State Phenomina, 118, (2006) 615-622
154. Nanostructure Formation of Amorphous Al-Ni-Mm Alloy, S.J. Hong, M.K. Lee, C.K. Rhee, Solid Stage Phenomena, 118 (2006) 645-650
155. Formation of Tensile Stress Induced Cracks in Flame Hardening Surface Treatment of 12Cr Blade Steel, M.K. Lee, G.H. Kim, K.H. Kim S.M. Hong, S.J. Hong, W.W. Kim, C.K. Rhee, Solid Stage Phenomena, 118 (2006) 191-196
156. Phase Transition and Thermoelectric Property of Ultra-Fine Structured Β-FeSi2 Compounds, S.J. Hong, C.K. Rhee, B.S. Chun, Solid Stage Phenomena, 118 (2006) 591-596
157. Formation of 7 Layer Structure in N-Type Bi2(Te0.95Se0.05)3 Thermoelectric Compound Fabricated by Gas Atomizing and Hot Extrusion Process, S.J. Hong, K.H. Lee, T.S. Lee, B.S. Chun, Materials Letter, 60 (2006) 2799-2802
158. Microstructures and Tensile Properties of Fe-40Al Intermetallic With High Boron Content, J.H. Lee, J.W. Byeon, S.J. Hong, S.I. Kwun, J.G. Hun, C.Y. Hyun, Materials Science Forum, 510-511 (2006) 351-353
159. Optimum Dopant Content of N-Type 95%Bi2Te3+5%Bi2Se3 Compounds Fabricated by Gas Atomization and Extrusion Process, S.J. Hong, Y.S Lee, J.W Byeon, B.S Chun, Journal of Alloys and Compounds, 414 (2006) 461-151
160. The Effect of Powder Size on Thermoelectric Properties of 95%Bi2Te3-5%Bi2Se3 Alloy, S.J. Hong, K.S. Hwang, J.W. Byeon, M.K. Lee, C.K. Rhee, B.S. Chun, Solid State Phenomena, 119 (2006) 271-274
161. Correlation of Magnetic Barkhausen Emission Profile With Strength of Thermally Degraded 2.25 Chromium-1molybdnum Steel, J.W. Byeon, S.J. Hong, S.I. Kwon, C.K. Lee, K.M. Kang, Y.H. Sohn, the Japan Institute of Metals, 46 (2006) 3089-3091
162. Plasma Spray Formed Near-Net-Shape MoSi2-Si3N4 Bulk Nanocomposites-Structure Property Evaluation, S.J Hong, P. Georgieva, V. Vishwanathan, K. Rea, S. Patil, S. Deshpande, S. Seal, Materials Science and Engineering: A, 404 (2005) 165-172
163. Microstructure and Properties of Rapidly Solidified and Mechanically Milled Nanostructure Al-Ni-Mn Alloys, S.J. Hong, B.S Chun, C. Suryanarayana, Metastable and Nanocrystalline Materials, 24-25, (2005) 193-196
164. Low Temperature Phase Formation in Mechanically Alloyed Cu–Ga Powders, S.J. Hong, C. Suryanarayana, Metastable and Nanocrystalline Materials, 24-25, (2005) 193-196.
165. Assessment of Surface Damage in Thermally Aged FSX414 Cobalt Based Superalloy Using Ultrasonic Rayleigh Wave, J.W. Byeon, C.S. Kim, Y.H. Kim, S.I. Kwun, S.J Hong, Materials Science Forum, 475-479 (2005) 651-654
166. Evaluation of Thermal Degradation of 2.25Cr-1Mo Steel by High Frequency Ultrasonic Attenuation Measurement, J.W. Byeon, C.S. Kim, S.I. Kwun, S.J Hong. Materials Science Forum, 475-479 (2005) 257-260
167. An Unusual Phase Transformation During Mechanical Alloying of an Fe-Based Bulk Metallic Glass Composition, P. Umesh, S.J. Hong, C. Suryanarayana, Journal of Alloys and Compounds, 389, (2005) 121-126,
168. Mechanical Properties and Fracture Behavior of a Nanostructured Al-20 Wt. PCT Si Alloy, S.J Hong, B.S Chun, C. Suryanarayana, Metallurgical and Materials Transaction A, 36A, 715-723 (2005)
169. Fabrication of Nanostructured Alumina by the Combined Processes of Magnetic Pulsed Compaction(MPC) and Spark Plasma Sintering(SPS), J.K. Lee, S.J. Hong, M.K. Lee, C.K. Rhee, Journal of Korean Powder Metallurgy Institute, 12, (2005) 345-350(Domestic)
170. Mechanism of Low Temperature Θ (CuGa2) Phase Formation in Cu-Ga Alloys by Mechanical Alloying, S.J Hong, C. Suryanarayana, Journal of Applied Physics, 96 (2004) 6120-6126
171. Section-Dependent Microstructure and Mechanical Properties of Rapidly Solidified and Extruded Al-20Si Alloy, S.J. Hong, C. Suryanarayana, B.S. Chun, Materials Research Bulletin, 39 (2004) 465-474
172. Consolidation of Rapidly Solidified Al-20 Wt % Si Alloy Powders Using Equal Channel Angular Processing, S.C. Kim, S.J. Hong, M.H. Seo, Y.G. Jeong, H.S. Kim, Journal of Korean Powder Metallurgy Institute, 11, (2004) 87-94
173. Equal Channel Angular Pressing of Rapidly Solidified Al-20 Wt % Si Alloy Powder Extrudates, S. C. Kim, S.J. Hong, S.M. Hong, H.S. Kim, Journal of Korean Powder Metallurgy Institute, 11, (2004) 233-241(Domestic)
174. The Effect of Ni, Ce Addition and Extrusion Temperature on Al-Si Alloy, T.H. Lee, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 11 (2004) 1-9 (Domestic)
175. Hardness Behavior of the Partially Crystallized Amorphous Al86Ni9Mm5 Alloys, T.S Kim, S.J Hong, B.T Lee, Materials Science and Engineering a, 363 (2003) 81-85
176. Isothermal Nano-Crystallization Behavior of a Melt-Spun Al86Ni9Mm5(Mm=Misch Metal) Amorphous Alloy, S.J. Hong, H.S. Kim, B.S. Chun, C. Suryanarayana, Materials Science Technology 19 (2003) 966-972
177. Microstructure and Thermoelectric Properties of Extruded N-Type 95%Bi2Te2-5%Bi2Se3 Alloys Along Bar Length, S.J Hong, B.S Chun, Materials Science and Engineering: A, 356 (2003) 345-351
178. Thermoelectric Properties of Newly Fabricated 95%Ni2Te3-5%Bi2Se3 Alloy by Gas Atomization and Extrusion Process, S.J. Hong, B.S. Chun, Materials Science and Engineering B, 98 (2003) 232-238
179. Extrusion Behavior of Gas Atomized Nanostructured Al88.7Ni7.9Mm3.4 Alloy Powders, S.J. Hong, B.S. Chun, Materials Science Engineering A, 348 (2003) 262-270
180. Microstructure and Thermoelectric Properties of N-Type 95%Bi2Te3-5%Bi2Se3 Alloy Produced by Rapid Solidification and Hot Extrusion, S.J. Hong, B.S. Chun, Materials Research Bulletin, 38 (2003) 599-608
181. Effect of Cluster on Mechanical Properties of SiC-Particle-Reinforced Aluminum Alloy 2024 Mmcs, S.J. Hong, H.M. Kim, D.H. Huh, C. Suryanarayana, B.S. Chun, Materials Science and Engineering A, 347 (2003) 198-204
182. The Effect of Extrusion Temperatures on Microstructures and Mechanical Properties of Ultra-Fine Structured and Extruded Al81-Si19 Alloys, T.H. Lee, a, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 10 (2003) 325-332(Domestic)
183. Nano Structure and Mechanical Properties of Rapidly Solidified Al81-(X+Y) Si19 Nixcey Alloy, T. H. Lee and S.J. Hong, Journal of Korean Powder Metallurgy Institute, 10.6 (2003) 406-414(Domestic)
184. Thermal Stability and Microstructure of Mechanically Milled Nanocrystalline Al-14wt%Ni-14%Mm Alloy Power, S.J. Hong, Y.S. Lee, B.S. Chun, Korean Journal of Metals and Materials, 41 (2003)(Domestic)
185. Particle Refinement and Nanostructure Formation of Gas Atomized Al-14Ni-14Mm Alloy Powder by Mechanical Milling, S.J. Hong, Y.S. Lee, B.S. Chun, Journal of Powder Metallurgy Institute 10, (2003) 26(Domestic)
186. Thermoelectric Properties of P-Type 25%Bi2Te3+75%Sb2Te3 Alloys Manufactured by Rapid Solidification and Hot Pressing, T.S. Kim, I.S. Kim, T.K. Kim, S.J. Hong, B.S. Chun, Materials Science and Engineering B, 90 (2002) 42-46.
187. Nanocrystallization Behavior of Al-Y-Ni With Cu Additions, S.J. Hong, B.S. Chun, S.S. Kang, R.Y. Lee, Journal of Powder Metallurgy Institute, 9 (2002) 19-24.
188. Size-Dependent Structure and Properties of Rapidly Solidified Aluminum Alloy Powders, S.J. Hong, C. Suryanarayana, B.S. Chun, Scripta Materialia, 45 (2001) 1341-1347.
189. Mechanical Milling of Gas-Atomized Al-Ni-Mm (Mm=Misch Metal) Alloy Powders, S.J. Hong, T.S. Kim, C. Suryanarayana, B.S. Chun, Metallurgical and Materials Transactions a, 32, (2001), 821-829
190. Micro-Structural Evolution during Mechanical Milling of Rapidly Solidified Al-14Ni-14Mm Alloy Powders, S.J. Hong, T.S. Kim, C. Suryanarayana, D.H. Kim, B.S. Chun, Journal of Materials Synthesis and Processing, 9, (2001) 39-47
191. The Mechanical Properties and Microstructure of Al Composite Bar Manufactured by Using Stone Mill Crushed Rapidly Solidified Al/Al2O3-TiC, D.Y. Maeng. J.H. Lee, T.S. Kim, H.T. Son, S.J. Hong, C.W. Won, S.S. Cho, B.S. Chun, Materials Science and Engineering A, 304-306 (2001) 564-568
192. Extrusion Behavior of RQ Al Composite Powder Manufactured by a Stone Mill Type Crusher, H.T. Son, T.S. Kim, J.H. Lee, D.Y. Maeng, S.J. Hong, C.W. Won, S.S. Cho, B.S. Chun, Materials Science and Engineering a, 304-306 (2001) 559-563
193. Characteristics of Ceramic Particle Reinforced Al Composite Powder Manufactured by a Stone Mill Type Crusher Using Twin Cast Al Alloy Flake: a Model on the Formation of Composite Powder, J.H. Lee, T.S. Kim, D.Y. Maeng, H.T. Son, S.J. Hong, C.W. Won, S.S. Cho, B.S. Chun, Materials Science and Engineering a, 304-306 (2001) 632-636
194. Nano Crystallization Behavior of Al-Y-Ni With Cu Additions, S.J. Hong, P.J. Warren, B.S. Chun, Materials Science and Engineering A, 304-306 (2001) 362-366
195. Structural Change of the Melt Spun Al-10Ni-5Y by the Addition of 1%Sr, T.S. Kim, S.J. Hong, J.H. Lee, K.H. Kim, Materials Science and Engineering A, 311 (2001) 226-231
196. Microstructure and Strength of Rapidly Solidified and Extruded Mg-Zn Alloys. D.Y. Maeng, T.S. Kim, J.H. Lee, S.J. Hong, S.K. Seo, B.S. Chu, Scripta Materialia, 43 (2000) 385-389
197. Effects of Graphite Content on the Wear Characteristics of Al/Graphite Alloys Composites, H.M. Kim, S.J. Hong, B.S. Chun, Korean Journal of Metals and Materials, 38 (2000)(Domestic)
198. The Microstructure Evolution and Mechanical Properties of Atomized Al-XFe-YCr Alloys, K.H. Kim. H.M. Kim, S.J. Hong, T.S. Kim, B.S. Chun, Metals and Materials, 5 (1999) 287-293.
199. Microstructural Behavior of Rapidly Solidified and Extruded Al-14wt%Ni-14wt%Mm (Misch Metal) Alloy Powders, S.J. Hong, T.S. Kim, H.S. Kim, W.T. Kim, B.S. Chun, Materials Science and Engineering a, 271 (1999) 469-476
200. Microstructures and Mechanical Properties of Al-20Si-XFe (X=3,5,7) Alloys Manufactured by Rapid Solidification Processing, T.S. Kim, S.J. Hong, W.T. Kim, C.W. Won, S.S. Cho, B.S. Chun, Materials Transactions, Jim, 39, (1998) 1214-1219
201. Warm Compaction of Rapidly Solidified Al-Ni-Mm Alloy Powders, S.J. Hong, T.S. Kim, H.R. Lee, H.S. Kim, B.S. Chun, Korean Journal of Metals and Materials, 36, 1998 (Domestic)
202. Microstructure and Mechanical Properties of Al-14wt%Ni-14wt%Mm Alloy Powders Consolidated by Extrusion, S.J. Hong, T.S. Kim, H.S. Kim, B.S. Chun, Korean Journal of Metals and Materials, 36, 1998 (Domestic)
203. Finite Element Analysis for Forging Processes of Rapidly Solidified Al-Si Alloys, H.T. Son, S.J. Hong, K.W. Kim, H.S. Kim, B.S. Chun, Journal of Korean Powder Metallurgy Institute, 5, 1998 (Domestic)
204. The Effects of Cr and Zr Addition on the Microstructure and Mechanical Properties of Rapidly Solidified Al-20Si-5Fe Alloys, S.J. Hong, T.S. Kim, W.T. Kim, B.S. Chun, Materials Science and Engineering A, 226-228 (1997) 878-882
205. A Numerical Investigation of Elastic and Plastic Properties in Nanocrystalline Materials, Journal of Korean Powder Metallurgy Institute, H.S. Kim, S.J. Hong, 34 (1996) (Domestic)
206. Fabrication of Rapidly Solidified Al-20wt%Si-5wt%Fe Alloy Powder and Mechanical Properties of its Extrudates, T.S. Kim, S.J. Hong, W.T. Kim, B.S. Chun, Journal of Korea Powder Metallurgy Institute , 1, 1994 (Domestic)
1. Grain refinement to improve thermoelectric and mechanical performance in n-type Bi2Te2.7Se0.3 alloys, Cheenepalli Nagarjuna, Peyala Dharmaiah, Ki Buem Kim, Soon-Jik Hong, Materials Chemistry and Physics 256 (2020): 123699
2. Recrystallization stimulated hierarchical structures for the simultaneous enhancement of Seebeck coefficient and electrical conductivity in Bi-Sb-Te alloys, Myeong-Won Lee, Peyala Dharmaiah, Chul-Hee Lee, Sung Ho Song, Jong-Hyeon Lee, Soon-Jik Hong, Journal of Alloys and Compounds 842 (2020): 155804
3. Fabrication of large-scale p-type 75% Sb2Te3-25% Bi2Te3 thermoelectric materials by gas atomization and hot isostatic pressing, Sang Min Yoon, Babu Madavali, Chul-Hee Lee, Olu Emmanuel Femi, Jong-Hyeon Lee, Sung Ho Song, Soon-Jik Hong, Materials Research Bulletin 130 (2020): 110924
4. Correlation with the composition of the different parts of p-type Bi0.5Sb1.5Te3 sintered bulks and their thermoelectric characteristics, May Likha Lwin, Peyala Dharmaiah, Suk-Min Yoon, Sung Ho Song, Hyoung Seop Kim, Jong-Hyeon Lee, Reza Ghomashchi, Soon-Jik Hong, Journal of Alloys and Compounds 845 (2020): 156114
5. 3D self-assemblies of β-Si3N4: Synthesis, characterization and growth mechanism, Hayk Nersisyan, Huynh Thanh Nam, Vladislav Ri, Hwa Young Woo, Soon-Jik Hong, Jong Hyeon Lee, Journal of Crystal Growth 549 (2020): 125866
6. Preparation and thermoelectric performance of nano rare-earth oxides dispersed p-type BiSbTe alloys by mechanical milling and spark plasma sintering, Babu Madavali, Dong-won Shin, Sung Ho Song, Dong-soo Kim, Jin Kyu Lee, Soon-Jik Hong, Materials Chemistry and Physics 253 (2020): 123378
7. Investigation of the magnetic properties and fracture behavior of Nd–Fe–B alloy powders during high-energy ball milling, Dong-won Shin, Babu Madavali, Dong-soo Kim, Jin-Young Lee, Min-chul Kang, Cheol-woong Yang, C Suryanarayana, and Soon-jik Hong, Materials Research Express 7.9 (2020): 096101
8. Highly luminescent polyethylene glycol-passivated graphene quantum dots for light emitting diodes, Hyun Jun Kim, Chung Kyeong Lee, Jin Gwan Seo, Soon Jik Hong, Gian Song, Junghoon Lee, Changui Ahn, Dong Ju Lee and Sung Ho Song, RSC Advances 10.46 (2020): 27418-27423
9. Influence of Spark Plasma Sintering Temperature on Microstructure and Tthermoelectric Properties of Cu-Doped Bi0. 5Sb1. 495Te3 Compound, Chul-Hee Lee, Peyala Dharmaiah, Jun-Woo Song, Kwang-Yong Jeong, Archives of Metallurgy and Materials 65 (2020)
10. Mechanical and thermoelectric properties of eutectic composite (Bi, Sb) 2Te3/Te thermoelectric material, Femi Emmanuel Olu, Soon-Jik Hong & Kamanio Chattopadhyay, Transactions of the Indian Institute of Metals 73.5 (2020): 1147-1155
11. Mechanical and thermoelectric properties of environment friendly higher manganese silicide fabricated using water atomization and spark plasma sintering, Peyala Dharmaiah, Chul-hee Lee, Gian Song, Soon-Jik Hong, Intermetallics 119 (2020): 106705
12. Experimental realization of heavily p-doped half-Heusler CoVSn compound, Sadeq Hooshmand Zaferani, Alireza Darebaghi, Soon-Jik Hong, Daryoosh Vashaee and Reza Ghomashchi, Energies 13.6 (2020): 1459
13. Effect of impact velocity on interface characteristics of ht-9 steel joints fabricated by magnetic pulse welding, Jun-Woo Song, Jin-Ju Park, Gyoung-Ja Lee, Min-Ku Lee, Kyu-Hyun Park, Soon-Jik Hong & Jung Gu Lee, Metals and Materials International 26.3 (2020): 360-369
14. Effect of Trace Elements (Co, Cr) on the Microstructure and Physical Properties of Al-Si-Cu-Mg-Fe Extruded Alloy, Ahn, S. S., Sharief, P., Lee, C. H., Son, H. T., Kim, Y. H., Kim, Y. C., Hong, S., Hong, S. J., Archives of Metallurgy and Materials 64.3 (2019): 857-862
15. Versatile and Tunable Electrical Properties of Doped Nonoxidized Graphene Using Alkali Metal Chlorides, Chung Kyeong Lee, Jin Gwan Seo, Hyun Jun Kim, Soon Jik Hong, Gian Song, Changui Ahn, Dong Ju Lee and Sung Ho Song, ACS applied materials & interfaces 11.45 (2019): 42520-42527
16. Reduction of thermal conductivity through the dispersion of TiC nanoparticles into a p-type Bi0. 5Sb1. 5Te3 alloy by ball milling and spark plasma sintering, Nagarjuna Cheenepalli, Madavali Babu, Lee Myeong-Won, Yoon Suk-Min, Hong Soon-Jik, Archives of Metallurgy and Materials 64 (2019)
17. Densification mechanism and its effect on the magnetic properties of Nd-Fe-B bonded magnets through the new high-energy compaction method, Dong-won Shin, Dong-soo Kim, Babu Madavali, Dong-hwan Kim, Jeong-gon Kim, Chul-Hee Lee, Suryanarayana Challapalli, Soon-jik Hong, Journal of Magnetism and Magnetic Materials 482 (2019): 280-286
18. Reduction of thermal conductivity in Al2O3 dispersed p-type bismuth antimony telluride composites, Babu Madavali, Haejin Kim, Soon-Jik Hong, Materials Chemistry and Physics 233 (2019): 9-15
19. Effect of milling time parameter on the microstructure and the thermoelectric properties of N-type Bi2Te2.7Se0.3 alloys, Sharief P., Madavali B., Koo J. M., Kim H. J., Hong S., Hong S.J., Archives of Metallurgy and Materials 64 (2019): 585-590
20. Fabrication and mechanical properties of TiC reinforced CoCrFeMnNi high-entropy alloy composite by water atomization and spark plasma sintering, Dami Yim, Praveen Sathiyamoorthi, Soon-Jik Hong, Hyoung Seop Kim, Journal of Alloys and Compounds 781 (2019): 389-396
21. Microstructure and Texture of P-Type Bi—Sb—Te Alloy by Using Gas-Atomization and Extrusion Processes, Son HyeonTaek, Yoo HyoSang, Kim YongHo, Lee ChulHee, Hong SoonJik, Journal of Nanoscience and Nanotechnology 19.4 (2019): 2236-2239
22. Formation mechanism of twin structures in p-type (Bi0.25Sb0.75)2Te3 thermoelectric compound, Kap Ho Lee, Peyala Dharmaiah, Soon-Jik Hong, Scripta Materialia 162 (2019): 437-441
23. Enhanced thermoelectric properties of Bi0.5Sb1.5Te3 composites with in-situ formed senarmontite Sb2O3 nanophase, Eun Bin Kim, Peyala Dharmaiah, Kap-Ho Lee, Chul-Hee Lee, Jong-Hyeon Lee, Jae-Kyo Yang, Dae-Hwan Jang, Dong-Soo Kim, Soon-Jik Hong, Journal of Alloys and Compounds 777 (2019): 703-711
24. Optimization of B2/L21 hierarchical precipitate structure to improve creep resistance of a ferritic Fe-Ni-Al-Cr-Ti superalloy via thermal treatments, Gian Song, Soon Jik Hong, Jin Kyu Leea, Sung Ho Song, Sung Hwan Hong, Ki Buem Kim, Peter K.Liaw, Scripta Materialia 161 (2019): 18-22
25. Enhanced thermoelectric properties by effective decoupling of electrical, thermal properties and seebeck coefficient through the addition of rare earth sesquioxides in p-type BiSbTe alloys, Babu Madavali, Dong-won Shin, Dong-Soo Kim, Soon-Jik Hong, Intermetallics 105 (2019): 139-145
26. High thermoelectric figure of merit in p-type (Bi2Te3) x−(Sb2Te3) 1− x alloys made from element-mechanical alloying and spark plasma sintering, Babu Madavali, Hyo-Seob Kim, Chul-Hee Lee, Dong-soo Kim & Soon-Jik Hong, Journal of Electronic Materials 48.1 (2019): 416-424
27. Microstructure and Texture of P-Type Bi–Sb–Te Alloy by Using Gas-Atomization and Extrusion Processes, Hyeon-Taek Son, Hyo-Sang Yoo, Yong-Ho Kim, Chul-Hee Lee and Soon-Jik Hong, Journal of Nanoscience and Nanotechnology, 18 (2018) 1-4
28. Enhanced thermoelectric properties of Bi0.5Sb1.5Te3 composites with in-situ formed senarmontite Sb2O3 nanophase, Eun Bin Kim, Peyala Dharmaiah, Kap-Ho Lee, Chul-Hee Lee, Jong-Hyeon Lee ,Jae-Kyo Yang, Dae-Hwan Jang, Dong- Soo Kim, Soon-Jik Hong, Journal of alloys and compound, 777(2019) 703-711
29. Optimization of B2/L21 hierarchical precipitate structure to improve creep resistance of a ferritic Fe-Ni-Al-Cr-Ti superalloy via thermal treatments, Gian Song, Soon-Jik Hong, Jin-Kyu Lee, Sung-Ho Song, Sung-Hwan Hong, Ki Buem Kim, Peter K.Liaw, Scripta Materialia, 161(2019) 18-22
30. Oxide formation mechanism and its effect on the microstructure and thermoelectric properties of p-type Bi0.5Sb1.5Te3 alloys, Intermetallics, May Likha Lwin, Peyala Dharmaiah, Babu Madavali, Chul-Hee Lee, Dong-won Shin, Gian Song, Kap-Ho Lee, Soon-Jik Hong, 103(2018) 23-32
31. Effect of Bismuth on hydrogen storage properties of melt-spun LaNi4.7-x Al0.3Bix (x = 0.0, 0.1, 0.2, 0.3) ribbons, International Journal of hydrogen energy, 43(2018) 20243-20251
32. Compaction behavior of water-atomized CoCrFeMnNi high-entropy alloy powders, Dami Yim, Min Ji Jang, Jae Wung Bae, Jongun Moon, Chul-Hee Lee, Soon-Jik Hong, Sun Ig Hong, Hyoung Seop Kim, Materials Chemistry and Physics, 210 (2018) 95-102
33. Domain structure analysis of (AgSbTe2)15(GeTe)85 thermoelectric compounds fabricated by rapid solidification process (PSP) and spark plasma sintering (SPS), K.H. Lee, S.J. Hong, Scripta Materialia, 137 (2017) 55-59
34. Large-scale production of (GeTe)x(AgSbTe2)100−x (x=75, 80, 85, 90) with enhanced thermoelectric properties via gas-atomization and spark plasma sintering, H.S. Kim, P. Dharmaiah, B. Madavali, R. Ott, S.J. Hong, Acta Materialia, 128 (2017) 43-53
35. Enhanced Seebeck Coefficient by Energy Filtering in Bi-Sb-Te Based Composites With Dispersed Y2O3 Nanoparticles, M. Babu, H.S Kim, K.H. Lee, S.J. Hong, Intermetallics, 82 (2017) 68-75
36. Structure and Properties of Ultrafine-Grained CocrFeMnNi High-Entropy Alloys Produced by Mechanical Alloying and Spark Plasma Sintering, S.H. Joo, H. Kato, M.J. Jang, J. Moon, E.B. Kim, S.J. Hong, H.S. Kim, Journal of Alloys and Compounds, 698 (2017) 591-604
37. Investigation of Microstructure and Thermoelectric Properties at Different Positions of Large Diameter Pellets of Bi0.5Sb1.5Te3 Compound, K.C. Park, P. Dharmaiah, H.S. Kim, S.J. Hong, Journal of Alloys and Compounds, 692 (2017) 573-582
38. Studies on Microstructure and Thermoelectric Properties of p-Type Bi-Sb-Te Based Alloys by Gas Atomization and Hot Extrusion Processing, K.C. Park, B. Madavali, E.B. kim, K.W. Koo, S.J. Hong, Journal of ELECTRONIC MATERIALS, 46 (2017) 2915-2920
39. Thermoelectric Properties of Bi2Te3 Nanocrystals with Diverse Morphologies Obtained via Modified Hydrothermal Metho, p. Dharmaiah, S.J. Hong, Journal of ELECTRONIC MATERIALS, 46 (2017) 3012-3019
40. Investigation of Thermoelectric Properties with Dispersion of Fe2O3 and Fe-85Ni Nanospheres in Bi0.5Sb1.5Te3 Matrix, S.M. Yoon, p. Dharmaiah, H.S Kim, C.H Lee, S.J. Hong, J.M. Koo, Journal of ELECTRONIC MATERIALS, 46 (2017) 2770-2777
41. Investigation of Spark Plasma Sintering Temperature on Microstructure and Thermoelectric Properties of p-type Bi-Sb-Te alloys, J.K. Han, D.W. Shin, B. Madavali, S.J. Hong, J. Korean Powder Metall, 24 (2017) 115-121
42. Optimization of Spark Plasma Sintering Temperature Conditions for Enhancement of Thermoelectric Performance in Gas-Atomized Bi0.5Sb1.5Te3 Compound, K.Y. Jeong. C.H. Lee, P. Dharmaiah, S.J. Hong, J. Korean Powder Metall, 24 (2017) 108-114
43. Enhanced thermoelectric performance through carrier scattering at spherical nanoparticles in Bi0.5Sb1.5Te3/Ta2O5 composites, E.B. Kim, P. Dharmaiah, D.W. Shin, K.H Lee, S.J. Hong, Journal of Alloys and Compounds, 703 (2017) 614-623
44. Effect of Ni carbon-coated Ni addition on the thermoelectric properties of 25Bi2Te3+75Sb2Te3 base composites, S.M. Yoon, P. Dharmaiah, O.E. Femi, C.H. Lee, S.J. Hong, Materials Chemistry and Physics, 195 (2017), 49-57
45. Enhanced thermoelectric figure-of-merit in Bi-Sb-Te nanocomposites with homogenously dispersed oxide ceramic ZrO2 nanoparticles, B. Madavali, H.S. Kim, S.J. Hong, JOURNAL OF APPLIED PHYSICS, 121 (2017) 225104
46. Separation behavior of impurities and selenium reduction by the reactive zone refining process using high-frequency induction heating to purify Te, M.S Shim, Y.M. Kim, H.H. Lee, S.J. Hong, J.H. Lee, Journal of Crystal Growth, 455 (2016) 6-12
47. Luminescence and Energy Transfer in Dy3+/Tb3+ Co-Doped Transparent Oxyfluorosilicate Glass–Ceramics for Green Emitting Applications, P. Dharmaiah, C.S. Dwaraka Viswanath, Ch. Basavapoornima, K.V. Krishnaiah, C.K. Jayasankar, S.J. Hong, Materials Research Bulletin, 83 (2016) 507-514
48. Enhanced thermoelectric cooling properties of Bi2Te3-xSex alloys fabricated by combining casting, milling and spark plasma sintering, S.T. Han, P. Rimal, C.H. Lee, H.S. Kim, S.J. Hong, Intermetallics, 78 (2016) 42-49
49. Influence of powder size on thermoelectric properties of p-type 25%Bi2Te3 single bond-75%Sb2Te3 alloys fabricated using gas-atomization and spark-plasma sintering, P. Dharmaiah, H.S. Kim, C.H. Lee, S.J. Hong, Journal of Alloys and Compounds, 686 (2016) 1-8
50. Effects of Bi2Se3 Amount in Thermoelectric Performance of Bi2(TeSe)3 Materials Fabricated by High-Energy Ball Milling, P. Rimal, S.T. Han, S.J. Hong, K.Y. Cho, I. Lee, J. Appl. Ceram. Technol, 13 (2016) 711-717
51. Large Scale Production of High Efficient and Robust P-Type Bi-Sb-Te Based Thermoelectric Materials by Powder Metallurgy, M.Babu, H.S. Kim, K.H. Lee, Y. Isoda, F. Gascoin, S.J. Hong, Materials and Design, 112 (2016) 485-494
52. Technology Trend Analysis of Co2 Solvent by Pantent Information, Y.S. Lee, S.j. lee, J.G. Lee, S.J. Hong, J. of Korean Society for Heat Treatment, 28 (2015) 251-257
53. Effects of Hydrogen Reduction in Microstructure, Mechanical and Thermoelectric Properties of Gas Atomized n-type Bi2Te2.7 Se0.3 Material, P. Rimal, S.M. Yoon, E.B. Kim, C.H. Lee, S.J. Hong, J. Korean Powder Metall. 23 (2016) 126-131
54. Investigation of Ball Size Effect on Microstructure and Thermoelectric Properties of p-type BiSbTe by Mechanical Alloying, M.L. Lwin, S.M. Yoon, B. Madvali, C.H. Lee, S.J. Hong, J. Korean Powder Metall, 23 (2016) 120-125
55. Enhanced Thermoelectric Properties of p-type Bi0.5Sb1.5Te3 Thermoelectric Materials by Mechanical Alloying and Spark Plasma Sintering, B. Madavali, S.J. Hong, Journal of ELECTRONIC MATERIALS, 45 (2016) 6059-6066
56. Effect of Milling Time on the Microstructure and Thermoelectric Properties of P-type TAGS-90 Alloys by HEM and SPS, H.S. Kim, B. Madavali, S.J. Hong, T.S. Kim, J. Appl. Ceram. Technol, 13 (2016) 239-244
57. Effect of Sintering Temperature on Thermoelectric Properties of p-Bi2Te3 Alloys Produced by Gas Atomization, B. Madavali, H.S. Kim, G.C. Park, J.M. Koo, S.J. Hong, H.T. Son, J. Appl. Ceram. Technol, 13 (2016) 245-251
58. Influence of Applied Pressure Load and Holding Time on Microstructure and Thermoelectric Properties of p-Type Bi2Te3 Alloys, B. Madavali, H.S. Kim, S.J. Hong, K.H. Lee, H.T. Son, J. Appl. Ceram. Technol, 13 (2016) 252-257
59. Fabrication of Zn4Sb3 Alloys by a Combination of Gas-Atomization and Spark Plasma Sintering Processes, P. Dharmaiah, H.S. Kim, K.H. Lee, S.J. Hong, Archives of Metallurgy and Materials, 60 (2015) 1417-1421
60. Effect of Ti Powder Addition on the Fabrication of TiO2 Nano-Powders, R.M. Raihanuzzaman, H.Y. Park, R. Ghomashchi, T.H. Kwon, H.T. Son, S.J. Hong, Archives of Metallurgy and Materials, 60 (2015) 1473-1477
61. Microstructure and Thermoelectric Properties of TAGS-90 Compounds Fabricataed by Mechanical Milling Process, H.S. Kim, M. Babu, S.J. Hong, Archives of Metallurgy and Materials, 60 (2015) 1231-1234
62. Effect of Different Mechanical Milling Processes on Morphology and Microstructural Changes of Nano and Micron Al-Powders, H.S. KIM, M. Babu, T.J. Eom, C.M. Kim, J.M. Koo, T.H. Lee, S.J. Hong, Archives of Metallurgy and Materials, (2015) 1235-1239
63. Effect of Spark Plasma Sintering Pressure on Mechanical Properties of WC-7.5 wt.% Nano Co, M.R. Raihanuzzaman, Z. Xie, S.J. Hong, R. Ghomashchi, Materials and Design, 68 (2015) 221-227
64. Spark Plasma sintering of WC-Co tool materials prepared with emphasis on WC core-Co shell structure development, S.K. Lee, H.S. Hong, H.S. Kim, S.J. Hong, J.H. Yoon, Journal of Refractory Metals and Hard Materials, 53 (2015) 41-45
65. Conventional sintering of WC with nano-sized Co binder: Characterization and mechanical behavior, R.M. Raihanuzzaman, S.T. Han, R. Ghomashchi, H.S. Kim, S.J. Hong, Journal of Refractory Metals and Hard Materials, 53 (2015) 2-6
66. Fabrication of GaN nanowires by a vapor–liquid–solid method using metal–organic chemical vapor deposition, J.Y. Yang, J.S. Yoon, B.S. O, C.S. Kim, S.J. Hong, H.S. Hong, J.M. Lee, Japanese Journal of Applied Physics, 54 (2015) 02BD03
67. Electromagnetic Wave Shielding Effect of Nano-powder Dispersed Epoxy Resin Composite, J.Y. Han, C.H. Lee, M.G. Choi, S.J. Hong, J.H. Park, D.J. Lee, J. Korean Powder Metall, 22 (2015) 234-239
68. Characterization of the Structural Modulations in n-type Bi2 (Te0.95Se0.05)3 Thermoelectric Compound, S.H. Yoon, K.H. Lee, S.J. Hong, Korean J. Met. Mater, 53 (2015) 123-132
69. Technology Trend Analysis of CO2 Capture and Storage by Patent Information, S.J. Lee, Y.S. Lee, J.G. Lee, S.J. Hong, J.B. Lee, J. Korean Powder Metall, 22 (2015) 289-297
70. Characterization of Short-Duration High-Energy Ball Milled WC-Co Powders and Subsequent Consolidations, M.R. Raihanuzzaman, T.S. Jeong, R. Ghomashchi, Z. Xie, S.J. Hong, Journal of Alloys and Compounds, 615 (2014) S564-S568
71. Thermally Decomposition of High Quality Flower-Like ZnO Nanorods from Zinc Acetate Dehydrate, M. Babu, H.S. Kim, S.J. Hong, Materials Letters, 132 (2014) 342-345
72. Powder Refinement, Consolidation and Mechanical Properties of Cemented Carbides, R.M. Raihanuzzaman, Z. Xie, R. Ghomashchia, S.J. Hong, Powder Technology, 261 (2014) 1-13
73. Effect of Chemical Composition on the Thermoelectric Properties of N-Type Bi2Te3 Alloys Fabricated by Gas Atomization and Hot Extrusion, M. Babu, H.S. Kim, S.J. Hong, Journal of Electronic Materials, 43 (2014) 2390-2396
74. Thermoelectric Properties of N-Type Bi2Te3 Alloys Produced by a Combined Process of Magnetic Pulsed Compaction (MPC) and Spark Plasma Sintering (SPS), C.H. Lee, M. F. Kilicaslan, M. Babu, S.J. Hong, Research on Chemical Intermediates, 40 (2014) 1-9
75. Refinement Behavior of Scrap Silicon by Mechanical Milling, R.M. Raihanuzzaman, J.W. Song, I. Lee, S.J. Hong, J.M. Koo, Currenct Nanoacience, 10 (2014) 441-444
76. Preparation of Te Nanopowder by Vacuum Distillation, W.G. Kim, H. Li, B.U. Yoo, H.H. Lee, S.J. Hong, S.H. Kim, J.H. Lee, Powder Technology, 256 (2014) 204-209
76. Effects of Atmosphere and Milling Time on the Coarsening of Copper Powders During Mechanical Milling, M. Babu, J.H. Lee, J.K. Lee, K.Y. Cho, C. Suryanarayana, S.J. Hong, Powder Technology, 256 (2014) 251-256
77. Characteristics of Machined Surface Layer of Cemented Carbide by Wire Electrical Discharge Machine, W.G. Sim, J.W. Song, K.S. Kim, S.J. Hong, Current Nanoscience, 10 (2014) 56-61
78. The Effect of Sc on the Microstructure and Mechanical Properties of Hypereutectic Al-Si Alloy Fabricated by a Gas Atomization Process, T.H. Lee, H.J. Ko, T.S. Jeong, S.J. Hong, Currenct Nanoacience, 10 (2014) 146-150
79. Effect of Micro Ti and Tio2-P-25 Nanopowder Addition on Mechanical Properties of Tio2 Nanopowders, H.Y. Park, R.M. Raihanuzzama, H.J. Ko, J.M. Park, Y.C. Kim, S.J. Hong, Current Nanoscience, 10 (2014) 3-6
80. Characteristics of Niobium Powder Used Capacitors Produced by Metallothermic Reduction in Molten Salt, J.S. Yoon, G.H. Lee, H.S. Hong, C.G. Lee, J.M. Lee, S.J. Hong, Current Nanoscience, 10 (2014) 131-134
81. Microstructure and Thermoelectric Properties of N-Type 95%Bi2Te3-5%Bi2Se3 Compound Prepared by High Energy Milling and Hot Extrusion, H.S. Kim, S.J. Hong, Current Nanoscience, 10 (2014) 118-122
82. Mechanical Properties of WC-Co Alloys With Various Mixing and Milling Conditions Using High Energy Ball Miller, J.W. Song, R.M. Raihanuzzaman, S.J. Hong, Current Nanoscience, 10 (2014) 62-65
83. Thermoelectric Properties of N-Type 95%Bi2Te3-5%Bi2Se3 Compounds Fabricated by Gas-Atomization and Spark Plasma Sintering, H.S. Kim, S.J. Hong, Journal of Alloys and Compounds, 586 (2014) S428-431
84. Numerical Analysis and Experimental Validation of Distillation Process for Purification of Tellurium, H. Li, W.G. Kim, B.W. Yoo, K.T. Park, H.H. Lee, J.C. Choi, S.J. Hong, M.S. Kong, H.Y. Lee, J.H Lee, Separation Science and Technology, 49 (2014) 197-208
85. Sliding Wear Resistance of Fine Co Powders Compacted by Magnetic-Pulsed Compaction Method, Fikretyilmaz, S.J. Hong, Wear, 306 (2013) 179-184
86. Densification Behaviour Analysis of Zro2 Nanopowders for Dental Applications Compacted by Magnetic Pulsed Compaction, H.Y. Park, M. Faith, S.J. Hong, Materials Chemistry and Physics, 141 (2013) 208-215
87. Microstructure and Microhardness of Melt-Spun Al-25Si-5Fe-XCo (X=0, 1, 3, 5) Alloys, M. Fatih, F. Yilaz. S. Ergen, O. Uzun, S.J. Hong, Materials Characterization, 77 (2013) 15~22
88. Mechanical Milling Behavior and Characteristics of Bi2Te3 Thermoelectric Materials, M. Babu, H.S. Kim, H.Y. Kim, S.J. Hong, Practical Metallography, 50 (2013) 143-153
89. Preparation of Niobium Powders for Solid Electrolyte Capacitors Through Hunter Process Using Metallothermic Reduction Method, J.S. Yoon, J.Y. Yang, J.M. Lee, S.J. Hong, Materials Transactions, 54 (2013) 114-118
90. A Development of the Led Tmga Precursor Reuse Technology, J.S. Yoon, J.Y. Yang, J.M. Lee, H.S. Hong, S.J. Hong, Materials Letter, 93 (2013) 153-156
91. Characteristics of Gan Nanowires Produced Using the VLS Method on the Growth Temperature, J.Y. Yang, B.S. Oh, C.S. Kim, J.K. Kim, J.S. Yoon, S.J. Hong, ECS Transactions, 50 (2013), 469-477
92. Trends in Development of Recycle Technology of Used Display Panel, 26 (2013) 28-42(Domestic)
93. Investigation of Material Flow and Industrial Trend of Domestic Europium, H.J. Ko, J.G. Kim, I.S. Lee, H.Y. Kang, S.J. Hong, Journal of Korean Powder Metallurgy Institution, 20 (2013) 382-387 (Domestic)
94. Analysis on the Impact of Composite by Using FEM, S.S. Kim, Y.C. Kim, J.H. Kook, S.H. Kim, J.U. Cho, S.J. Hong, the Korea Academia - Industrial Cooperation Society, 14 (2013) 542-547 (Domestic)
95. The Effect of Milling Conditions for Dissolution Efficiency of Valuable Metals from PDP Waste Panels, H.S. Kim, C.M. Kim, C.H. Lee, S.K. Lee, H.S. Hong, J.M. Koo, S.J. Hong, 20 (2013) 107-113(Domestic)
96. The Effect of Milling Conditions for Dissolutions Efficiency of Valuable Metals from PDP Waste Panels, H.S. Kim, C.M. Kim, C.H. Lee, S.K. Lee, H.S. Hong, J.M. Koo, S.J. Hong, Journal of Korean Powder Metallurgy Institution, 20 (2013) 107-113 (Domestic)
97. Recovery of Indium from Used LCD Panel by a Time Efficient and Environmentally Sound Method Assisted HEBM , C.H. Lee, M.F. Kilicaslan, M.K. Jung, J.H. Lee, H.S. Hong, J.M. Koo, S.J. Hong, Waste Management, 33 (2012) 730-734
98. Fabrication of Cobalt Nano-Particles by Pulsed Wire Evaporation Method in Nitrogen Atmosphere, F. Yilmaz, D.J. Lee, J.W. Song, H.S. Hong H.T. Son, J.S. Yoon, S.J. Hong, Powder Technology, 235 (2012) 1047-1052
99. Effect of Co on Si and Fe-Containing Intermetallic Compounds (IMCS) in Al-20Si-5Fe Alloys, M.F. Kilicaslan, F. Yilmaz, S.J. Hong O. Uzun, Materials Science & Engineering a, A556 (2012) 716-721
100. Effects of Substitution of Al and Bi for Ni on Structure and Hydrogen Storage Properties of LaNi4.7-XAl0.3Bix (X = 0.1, 0.2, 0.3) Alloy, F. Yilmaz, M.F. Kilicaslan, O.M. Atanur, S.J. Hong, O. Uzun, Japanese Journal of Applied Physics 51 (2012) 09mb01-1~4
101. Evaluation of Mechanical Properties of WC-Co Alloys Fabricated by Magnetic Pulsed Compaction, R.M. Raihanuzzaman, J.W. Song, H.S. Hong, S.J. Hong, Journal of Alloys and Compounds, 536s (2012) S211-S215
102. Refinement Behavior of Scrap Silicon by Mechanical Milling, J.W Song, R.M. Raihanuzzaman, S. H. Lee, Y.C. Kim, H.S. Kim, S.J. Hong, Journal of Alloys and Compounds, (2012) in Press
103. Fabrication of Al-20wt%Si Powder Using Scrap Si by Ultra High-Energy Milling Process, W. K. Kang, F. Yilmaz, H.S. Kim, J.K. Lee, J.M. Koo, S.J. Hong, Journal of Alloys and Compounds, 536s (2012) S45-S49
104. Impact Fracture Behavior at the Material of Aluminum Foam, J.U. Cho, S.J. Hong, S.K. Lee, C.D. Cho Materials Science and Engineering a 539 (2012) 250-258
105. Effect of Multiple Pressures by Magnetic Pulsed Compaction (MPC) on the Density of Gas-Atomized Al-20Si Powder, H.Y. Park, M.F. Kilicaslan, S.J. Hong, Powder Technology 224 (2012) 360-364
106. Wear Behavior of Al-Fe-Cr-Ti Alloys Fabricated by Magnetic Pulsed Compaction, M.R. Raihanuzzaman, J.H. Kim, J.K. Lee, J.S. Yoon, H.T. Son, S.J. Hong, Powder Technology 225 (2012) 227-231
107. Highly Dense Steel Components Prepared by Magnetic Pulsed Compaction of Iron-Based Powders, J.G. Lee, C.H. Lim, H.S. Kim, S.J. Hong, M.T. Kim, B.C. Kang, D.K. Park, M.K. Lee, C.K. Rhee, Powder Technology 228 (2012) 254-257
108. Effect of Variation in Voltage on the Synthesis of Ag Nano-Powder by Pulsed Wire Evaporation, J.W. Song, D.J. Lee, F. Yilmaz, S.J. Hong, Journal of Nanomaterials, 792429 (2012) 1-5
109. Fabrication of Ceramic Dental Block by Magnetic Pulsed Compaction, H.Y. Park, H.S. Kim, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 19 (2012) 373-382 (Domestic)
110. Industrial Supply Chain Trend of Domestic Tungsten, J.W. Song, S.H. Lee, H.S. Hong, H.Y. Kang, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 19 (2012) 79-86 (Domestic)
111. Recycling Technology and Status of Tellurium Materials, H.S Kim, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 19 (2012) 232-238 (Domestic)
112. Fabrication of Fe Coated Mg Based Desulfurization Powder by Mechanical Alloying Process, J.W. Song, O. Gullermo, B.S. Chun, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 19 (2012) 226-231 (Domestic)
113. Effect of Sc Addition on the Microstructure and Mechanical Properties of As-Atomized and Extruded Al-20Si Alloys, M.F. Kilicaslan, W.R. Lee, T.H. Lee, Y.H. Shon, S.J. Hong, Materials Letter, 71 (2011) 164-167
114. Effect of Magnetic Pulsed Compaction (MPC) on Sintering Behavior of Materials, S.J. Hong, R.M. Raihanuzzaman, in Tech Publication Croatia (2011) Sintering Chapter 10
115. Synthesis and Characterization of Agglomerated Coarse Al Powders Comprising Nanoparticles by Low Energy Milling Process, N. Eom, M.H. Bhuiyan, S.J. Hong, Materials Transaction, 52 (2011) 1674-1678
116. Fabrication and Densification Behavior Analysis of Metalizing Targets Using ZrO2 Nanopowders by Magnetic Pulsed Compaction, J.H. Kim, R.M. Rumman, J.K. Lee, M.K. Lee, C.K. Rhee, H.S. Kim, S.J. Hong, Materials Transaction, 52 (2011) 1156-1162
117. The Effects of Electron Beam Irradiation Direction on Mechanical Properties and Microstructural Characteristics of Thick Al 5052 Alloys Plate, I.H. Kim, B.S. Chun, S.J. Hong, Metals and Materials International, 17 (2011) 357-363
118. Microstructural Behavior of the Heat Treated N-Type 95% Bi2Te3–5% Bi2Se3 Gas Atomized Thermoelectric Powders, M.H. Bhuiyan, T.S. Kim, J.M. Koo, S.J. Hong, Journal of Alloys and Compounds, 509 (2011) 1722-1728
119. Corrosion of Ti-STS Dissimilar Joints Brazed by a Ag Interlayer and Ag-Cu-(Pd) Alloy Fillers, M.K. Lee, J.J. Park, G.J. Lee, D.W. Kim, C.H. Lim, C.K. Rhee, Y.B. Lee, J.K. Lee, S.J. Hong, Journal of Nuclear Materials, 409 (2011) 183-187
120. Optimization of Surface Roughness by Taguchi Design Method, R.M. Rumman, S.J. Hong, Advanced Materials Research, 156-157 (2011) 392-395
121. Fabrication and Characterization of Micro-Sized Copper Bump of Multi-Layer PCD by Pulse-Reverse Electroplating, H.S. Hong, M.H. Seo, S.K Lee, S.J. Hong, H.G. Suk, J.H. Ahn, Current Applied Physics 11 (2011) S289-S292
122. Microstructure and Characteristics of Ag-SnO2 Contact Materials Prepared by Magnetic Pulsed Compaction, J.S. Park, Y.J. Kim, M.H. Lee, H.S. Lee, J.K. Lee, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 18 (2011) 372-377 (Domestic)
123. Synthesis and Characterization of (AgSbTe2)15(GeTe)85 Thermoelectric Powder by Gas Atomization Process, H.S. Kim, J.K. Lee, J.M. Koo, B.S. Cheon, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 18 (2011) 449-455 (Domestic)
124. Characteristic of Indium Dissolution of Waste LCD Panel Powders Fabricated by High Energy Ball Milling (HEBM) Process With Milling Time, H.S. Kim, J.J. Sung, C.H. Lee, H.S. Hong, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 18 (2011) 378-384 (Domestic)
125. Fabrication of an Yttria Thin-Wall Tube by Radial Magnetic Pulsed Compaction of Powder-Based Tapes, J.G. Lee, S.J. Hong, J.J. Park, M.K. Lee, V.V. Ivanov, C.K. Rhee, Materials Transactions a, 51 (2010) 1689-1693
126. Recycling of the Indium Scrap from Ito Sputtering Waste, H.S. Hong, H.C. Jung, S.J. Hong, Research on Chemical Intermediates, 36 (2010) 761-766
127. High Energy Ball-Mill Behavior of Titania + Hydroxyapatite Composite Nano-Powders, J.G. Lee, S.M. Hong, J.J. Park, M.K. Lee, U.H. Joo, C.K. Lee, S.J. Hong, Materials Characterization, 61 (2010) 1290-1293
128. Interlayer Engineering for Dissimilar Bonding of Titanium To Stainless Steel, C.K. Rhee, M.K. Lee, J.K. Lee, Y.H. Choi, D.W. Kim, Y.B. Lee, S.J. Hong, Materials Letters, 64 (2010) 1105-1108
129. Densification of Tio2 Nanopowder by Magnetic Pulsed Compaction, H.S. Kim, J.K. Lee, C.K. Rhee, S.J. Hong, Materials Transaction, 51 (2010) 578-581
130. Etching Effect on Microstructural Behavior of Gas Atomized Al-20Si Alloy Powder, S.J. Hong, Materials Transaction, 51 (2010) 1055-1058
130. Fatigue Characteristics of High Strength C70S6 and SMA40 Steels, H.S. Kim, T.G. Kim, H.S. Kim, S.J. Hong, Materials Science and Engineering A, 527 (2010) 2813-2818
131. Consolidation of Mixed Diamond and Cobalt Granule Powders by Magnetic Pulsed Compaction, J.G. Lee, M.K. Lee, S.J. Hong, H.W. Lee, S.P. Pyun, C.K. Rhee, Materials Letters, 64 (2010) 35-37
132. Thermoelectric Properties of Rapid Solidified P-Type Bi2Se3 Alloy Fabricated by Spark Plasma Sintering (SPS) Process, C.D. Moon, D.H. Kim, T.S. Kim, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 17 (2010) 494-498 (Domestic)
133. Phase Transformation and Microstructure of FeSi2 Thermoelectric Compounds Manufactured by Powder Metallurgy, K.T. Park, J.G. Shin, B.S. Chun, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 17 (2010) 482-488 (Domestic)
134. Refinement Behavior of Coarse Magnesium Powder by High Energy Ball Milling, J.W. Song, H.S. Kim, H.M. Kim, T.S. Kim, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 17 (2010) 302-311 (Domestic)
135. Effect of Initial Silicon Scrap Size on Powder Refining Process During High Energy Ball Milling (HEBM), J.W. Song, H.S. Kim, S.S. Kim, J.M. Koo, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 17 (2010) 242-250 (Domestic)
136. Recycling Technology for End-of-Life LCD Units, H.M. Lee, H.S. Hong, H.C. Jung, H.Y. Kang, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 17 (2010) 88-100 (Domestic)
137. Pre-Compaction Effects on Density and Mechanical Properties of Al2O3nanopowder Compacts Fabricated by Magnetic Pulsed Compaction. S.J. Hong, J.G. Lee, M.K. Lee, C.K. Rhee, Materials Transaction, 50 (2009) 2885-2890
138. Microstructure and Mechanical Properties of Al-Si-X Alloys Fabricated by Gas Atomization and Extrusion Process, T.H. Lee, S.J. Hong, Journal of Alloys and Compounds, 487 (2009) 218-224
139. High Strength Bonding of Titanium To Stainless Steel Using an Ag Interlayer, J.G. Lee, S.J. Hong, M.K. Lee, C.K. Rhee, Journal of Nuclear Materials 395 (2009) 145-149
140. Interpretation of X-Ray Diffraction Analysis and Tem Microstructure of MA’ed Powders With Peritectic Reaction, T.S. Kim, H.S. Kim, T.G. Kim, H.G. Jeong, S.J. Hong, Journal of Alloys and Compounds, 483 (2009) 593-596
141. Recycling Technology of Rare Metals and Related Industrial Trend, H.S. Hong, S.K. Lee, G.H. Kim, T.S. Kim, H.Y. Kang, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 16 (2009) 379-388 (Domestic)
142. Effect of Ball Milling on Graphite Dispersion and Mechanical Properties in Rapidly Solidified 6061 Al Composite, H.T. Son, J.S. Lee, B.S. Chun, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 16 (2009) 209-216 (Domestic)
143. The Effect of Ti Powder Addition on Compaction Behavior of Tio2 Nano Powder, J.S. Park, H.S. Kim, K.S. Lee, J.G. Lee, C.K. Rhee, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 16, (2009) 223-230 (Domestic)
144. Thermal Stability, Microstructure and Mechanical Properties of Nanostructured Al-Ni-Mm-X(X=Cu and Fe) Alloys Hot-Extruded from Gas-Atomized Powders, H.S. Kim, T.K. Kim, Y.H. Shon, S.J. Hong, Materials Transaction 49 (2008) 1223-1228
145. Densification of Tio2 Nano Powder by Magnetic Pulsed Compaction, H.S. Kim, J.G. Lee, C.K. Rhee, J.M. Koo, S.J. Hong, Korean Journal of Materials Research, 18 (2008) 411-416 (Domestic)
146. Magnetic Pulsed Compaction of Ferromagnetic Nano-Powders for Soft-Magnetic Core, S.J. Hong, G.H. Lee, C.K. Rhee, W.W. Kim, K.S. Lee, Materials Science and Engineering: A, 449-451 (2007) 401-406
147. Suspension Polymerization and Characterization of Transparent Poly (Methyl Methacrylate-Co-Isobornyl Methacrylate), S.I. Park, S.I. Lee, S.J. Hong, K.Y. Cho, the Polymer Society of Korea, 15, (2007) 418-423
148. Synthesis and Characterization of Nanoparticles of ZnO by Levitational Gas Condensation, Y.R. Uhm, B.S. Han, S.J. Hong, M.K. Lee, C.K. Rhee, Materials Science and Engineering: a, 449-451, (2007) 813-816
149. Consolidation and Mechanical Properties of Near-Net-Shape Al21 Wt% Si Component Fabricated by Plasma Spray Forming, S.J. Hong, S. Patil, C.K. Rhee, S. Seal, Solid State Phenomena, 119, (2007) 183-186
150. Mechanical Properties of Equal Channel Angular Pressed Powder Extrudates of a Rapidly Solidified Hypereutectic Al-20wt% Si Alloy, S.C. Yoon, S.J. Hong, S.I. Hong, H.S. Kim, Materials Science and Engineering: A, 449-451 (2007) 966-970
151. The Mechanical Milling Behavior of Ductile Cu Flakes When Using Ultrafine Al2O3 Reinforcements, M.K. Lee, G.H. Kim, S.M. Hong, J.K. Lee, S.J. Hong, Y.R. Uhm, C.K. Rhee, Solid State Phenomena, 119, (2007) 179-182
152. Fabrication of High-Density Nanostructured Alumina by the Combined Processes of Magnetic Pulsed Compaction(MPC) and Spark Plasma Sintering(SPS), J.K. Lee, S.J. Hong, M.K. Lee, C.K. Rhee, Solid Stage Phenomena, 118, (2006) 597-602
153. Consolidation of Al2O3 Nanopowder by Magnetic Pulsed Compaction and Sintering, S.J. Hong, J.K. Lee, M.K. Lee, W.W. Kim, C.K. Rhee, Solid State Phenomina, 118, (2006) 615-622
154. Nanostructure Formation of Amorphous Al-Ni-Mm Alloy, S.J. Hong, M.K. Lee, C.K. Rhee, Solid Stage Phenomena, 118 (2006) 645-650
155. Formation of Tensile Stress Induced Cracks in Flame Hardening Surface Treatment of 12Cr Blade Steel, M.K. Lee, G.H. Kim, K.H. Kim S.M. Hong, S.J. Hong, W.W. Kim, C.K. Rhee, Solid Stage Phenomena, 118 (2006) 191-196
156. Phase Transition and Thermoelectric Property of Ultra-Fine Structured Β-FeSi2 Compounds, S.J. Hong, C.K. Rhee, B.S. Chun, Solid Stage Phenomena, 118 (2006) 591-596
157. Formation of 7 Layer Structure in N-Type Bi2(Te0.95Se0.05)3 Thermoelectric Compound Fabricated by Gas Atomizing and Hot Extrusion Process, S.J. Hong, K.H. Lee, T.S. Lee, B.S. Chun, Materials Letter, 60 (2006) 2799-2802
158. Microstructures and Tensile Properties of Fe-40Al Intermetallic With High Boron Content, J.H. Lee, J.W. Byeon, S.J. Hong, S.I. Kwun, J.G. Hun, C.Y. Hyun, Materials Science Forum, 510-511 (2006) 351-353
159. Optimum Dopant Content of N-Type 95%Bi2Te3+5%Bi2Se3 Compounds Fabricated by Gas Atomization and Extrusion Process, S.J. Hong, Y.S Lee, J.W Byeon, B.S Chun, Journal of Alloys and Compounds, 414 (2006) 461-151
160. The Effect of Powder Size on Thermoelectric Properties of 95%Bi2Te3-5%Bi2Se3 Alloy, S.J. Hong, K.S. Hwang, J.W. Byeon, M.K. Lee, C.K. Rhee, B.S. Chun, Solid State Phenomena, 119 (2006) 271-274
161. Correlation of Magnetic Barkhausen Emission Profile With Strength of Thermally Degraded 2.25 Chromium-1molybdnum Steel, J.W. Byeon, S.J. Hong, S.I. Kwon, C.K. Lee, K.M. Kang, Y.H. Sohn, the Japan Institute of Metals, 46 (2006) 3089-3091
162. Plasma Spray Formed Near-Net-Shape MoSi2-Si3N4 Bulk Nanocomposites-Structure Property Evaluation, S.J Hong, P. Georgieva, V. Vishwanathan, K. Rea, S. Patil, S. Deshpande, S. Seal, Materials Science and Engineering: A, 404 (2005) 165-172
163. Microstructure and Properties of Rapidly Solidified and Mechanically Milled Nanostructure Al-Ni-Mn Alloys, S.J. Hong, B.S Chun, C. Suryanarayana, Metastable and Nanocrystalline Materials, 24-25, (2005) 193-196
164. Low Temperature Phase Formation in Mechanically Alloyed Cu–Ga Powders, S.J. Hong, C. Suryanarayana, Metastable and Nanocrystalline Materials, 24-25, (2005) 193-196.
165. Assessment of Surface Damage in Thermally Aged FSX414 Cobalt Based Superalloy Using Ultrasonic Rayleigh Wave, J.W. Byeon, C.S. Kim, Y.H. Kim, S.I. Kwun, S.J Hong, Materials Science Forum, 475-479 (2005) 651-654
166. Evaluation of Thermal Degradation of 2.25Cr-1Mo Steel by High Frequency Ultrasonic Attenuation Measurement, J.W. Byeon, C.S. Kim, S.I. Kwun, S.J Hong. Materials Science Forum, 475-479 (2005) 257-260
167. An Unusual Phase Transformation During Mechanical Alloying of an Fe-Based Bulk Metallic Glass Composition, P. Umesh, S.J. Hong, C. Suryanarayana, Journal of Alloys and Compounds, 389, (2005) 121-126,
168. Mechanical Properties and Fracture Behavior of a Nanostructured Al-20 Wt. PCT Si Alloy, S.J Hong, B.S Chun, C. Suryanarayana, Metallurgical and Materials Transaction A, 36A, 715-723 (2005)
169. Fabrication of Nanostructured Alumina by the Combined Processes of Magnetic Pulsed Compaction(MPC) and Spark Plasma Sintering(SPS), J.K. Lee, S.J. Hong, M.K. Lee, C.K. Rhee, Journal of Korean Powder Metallurgy Institute, 12, (2005) 345-350(Domestic)
170. Mechanism of Low Temperature Θ (CuGa2) Phase Formation in Cu-Ga Alloys by Mechanical Alloying, S.J Hong, C. Suryanarayana, Journal of Applied Physics, 96 (2004) 6120-6126
171. Section-Dependent Microstructure and Mechanical Properties of Rapidly Solidified and Extruded Al-20Si Alloy, S.J. Hong, C. Suryanarayana, B.S. Chun, Materials Research Bulletin, 39 (2004) 465-474
172. Consolidation of Rapidly Solidified Al-20 Wt % Si Alloy Powders Using Equal Channel Angular Processing, S.C. Kim, S.J. Hong, M.H. Seo, Y.G. Jeong, H.S. Kim, Journal of Korean Powder Metallurgy Institute, 11, (2004) 87-94
173. Equal Channel Angular Pressing of Rapidly Solidified Al-20 Wt % Si Alloy Powder Extrudates, S. C. Kim, S.J. Hong, S.M. Hong, H.S. Kim, Journal of Korean Powder Metallurgy Institute, 11, (2004) 233-241(Domestic)
174. The Effect of Ni, Ce Addition and Extrusion Temperature on Al-Si Alloy, T.H. Lee, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 11 (2004) 1-9 (Domestic)
175. Hardness Behavior of the Partially Crystallized Amorphous Al86Ni9Mm5 Alloys, T.S Kim, S.J Hong, B.T Lee, Materials Science and Engineering a, 363 (2003) 81-85
176. Isothermal Nano-Crystallization Behavior of a Melt-Spun Al86Ni9Mm5(Mm=Misch Metal) Amorphous Alloy, S.J. Hong, H.S. Kim, B.S. Chun, C. Suryanarayana, Materials Science Technology 19 (2003) 966-972
177. Microstructure and Thermoelectric Properties of Extruded N-Type 95%Bi2Te2-5%Bi2Se3 Alloys Along Bar Length, S.J Hong, B.S Chun, Materials Science and Engineering: A, 356 (2003) 345-351
178. Thermoelectric Properties of Newly Fabricated 95%Ni2Te3-5%Bi2Se3 Alloy by Gas Atomization and Extrusion Process, S.J. Hong, B.S. Chun, Materials Science and Engineering B, 98 (2003) 232-238
179. Extrusion Behavior of Gas Atomized Nanostructured Al88.7Ni7.9Mm3.4 Alloy Powders, S.J. Hong, B.S. Chun, Materials Science Engineering A, 348 (2003) 262-270
180. Microstructure and Thermoelectric Properties of N-Type 95%Bi2Te3-5%Bi2Se3 Alloy Produced by Rapid Solidification and Hot Extrusion, S.J. Hong, B.S. Chun, Materials Research Bulletin, 38 (2003) 599-608
181. Effect of Cluster on Mechanical Properties of SiC-Particle-Reinforced Aluminum Alloy 2024 Mmcs, S.J. Hong, H.M. Kim, D.H. Huh, C. Suryanarayana, B.S. Chun, Materials Science and Engineering A, 347 (2003) 198-204
182. The Effect of Extrusion Temperatures on Microstructures and Mechanical Properties of Ultra-Fine Structured and Extruded Al81-Si19 Alloys, T.H. Lee, a, S.J. Hong, Journal of Korean Powder Metallurgy Institute, 10 (2003) 325-332(Domestic)
183. Nano Structure and Mechanical Properties of Rapidly Solidified Al81-(X+Y) Si19 Nixcey Alloy, T. H. Lee and S.J. Hong, Journal of Korean Powder Metallurgy Institute, 10.6 (2003) 406-414(Domestic)
184. Thermal Stability and Microstructure of Mechanically Milled Nanocrystalline Al-14wt%Ni-14%Mm Alloy Power, S.J. Hong, Y.S. Lee, B.S. Chun, Korean Journal of Metals and Materials, 41 (2003)(Domestic)
185. Particle Refinement and Nanostructure Formation of Gas Atomized Al-14Ni-14Mm Alloy Powder by Mechanical Milling, S.J. Hong, Y.S. Lee, B.S. Chun, Journal of Powder Metallurgy Institute 10, (2003) 26(Domestic)
186. Thermoelectric Properties of P-Type 25%Bi2Te3+75%Sb2Te3 Alloys Manufactured by Rapid Solidification and Hot Pressing, T.S. Kim, I.S. Kim, T.K. Kim, S.J. Hong, B.S. Chun, Materials Science and Engineering B, 90 (2002) 42-46.
187. Nanocrystallization Behavior of Al-Y-Ni With Cu Additions, S.J. Hong, B.S. Chun, S.S. Kang, R.Y. Lee, Journal of Powder Metallurgy Institute, 9 (2002) 19-24.
188. Size-Dependent Structure and Properties of Rapidly Solidified Aluminum Alloy Powders, S.J. Hong, C. Suryanarayana, B.S. Chun, Scripta Materialia, 45 (2001) 1341-1347.
189. Mechanical Milling of Gas-Atomized Al-Ni-Mm (Mm=Misch Metal) Alloy Powders, S.J. Hong, T.S. Kim, C. Suryanarayana, B.S. Chun, Metallurgical and Materials Transactions a, 32, (2001), 821-829
190. Micro-Structural Evolution during Mechanical Milling of Rapidly Solidified Al-14Ni-14Mm Alloy Powders, S.J. Hong, T.S. Kim, C. Suryanarayana, D.H. Kim, B.S. Chun, Journal of Materials Synthesis and Processing, 9, (2001) 39-47
191. The Mechanical Properties and Microstructure of Al Composite Bar Manufactured by Using Stone Mill Crushed Rapidly Solidified Al/Al2O3-TiC, D.Y. Maeng. J.H. Lee, T.S. Kim, H.T. Son, S.J. Hong, C.W. Won, S.S. Cho, B.S. Chun, Materials Science and Engineering A, 304-306 (2001) 564-568
192. Extrusion Behavior of RQ Al Composite Powder Manufactured by a Stone Mill Type Crusher, H.T. Son, T.S. Kim, J.H. Lee, D.Y. Maeng, S.J. Hong, C.W. Won, S.S. Cho, B.S. Chun, Materials Science and Engineering a, 304-306 (2001) 559-563
193. Characteristics of Ceramic Particle Reinforced Al Composite Powder Manufactured by a Stone Mill Type Crusher Using Twin Cast Al Alloy Flake: a Model on the Formation of Composite Powder, J.H. Lee, T.S. Kim, D.Y. Maeng, H.T. Son, S.J. Hong, C.W. Won, S.S. Cho, B.S. Chun, Materials Science and Engineering a, 304-306 (2001) 632-636
194. Nano Crystallization Behavior of Al-Y-Ni With Cu Additions, S.J. Hong, P.J. Warren, B.S. Chun, Materials Science and Engineering A, 304-306 (2001) 362-366
195. Structural Change of the Melt Spun Al-10Ni-5Y by the Addition of 1%Sr, T.S. Kim, S.J. Hong, J.H. Lee, K.H. Kim, Materials Science and Engineering A, 311 (2001) 226-231
196. Microstructure and Strength of Rapidly Solidified and Extruded Mg-Zn Alloys. D.Y. Maeng, T.S. Kim, J.H. Lee, S.J. Hong, S.K. Seo, B.S. Chu, Scripta Materialia, 43 (2000) 385-389
197. Effects of Graphite Content on the Wear Characteristics of Al/Graphite Alloys Composites, H.M. Kim, S.J. Hong, B.S. Chun, Korean Journal of Metals and Materials, 38 (2000)(Domestic)
198. The Microstructure Evolution and Mechanical Properties of Atomized Al-XFe-YCr Alloys, K.H. Kim. H.M. Kim, S.J. Hong, T.S. Kim, B.S. Chun, Metals and Materials, 5 (1999) 287-293.
199. Microstructural Behavior of Rapidly Solidified and Extruded Al-14wt%Ni-14wt%Mm (Misch Metal) Alloy Powders, S.J. Hong, T.S. Kim, H.S. Kim, W.T. Kim, B.S. Chun, Materials Science and Engineering a, 271 (1999) 469-476
200. Microstructures and Mechanical Properties of Al-20Si-XFe (X=3,5,7) Alloys Manufactured by Rapid Solidification Processing, T.S. Kim, S.J. Hong, W.T. Kim, C.W. Won, S.S. Cho, B.S. Chun, Materials Transactions, Jim, 39, (1998) 1214-1219
201. Warm Compaction of Rapidly Solidified Al-Ni-Mm Alloy Powders, S.J. Hong, T.S. Kim, H.R. Lee, H.S. Kim, B.S. Chun, Korean Journal of Metals and Materials, 36, 1998 (Domestic)
202. Microstructure and Mechanical Properties of Al-14wt%Ni-14wt%Mm Alloy Powders Consolidated by Extrusion, S.J. Hong, T.S. Kim, H.S. Kim, B.S. Chun, Korean Journal of Metals and Materials, 36, 1998 (Domestic)
203. Finite Element Analysis for Forging Processes of Rapidly Solidified Al-Si Alloys, H.T. Son, S.J. Hong, K.W. Kim, H.S. Kim, B.S. Chun, Journal of Korean Powder Metallurgy Institute, 5, 1998 (Domestic)
204. The Effects of Cr and Zr Addition on the Microstructure and Mechanical Properties of Rapidly Solidified Al-20Si-5Fe Alloys, S.J. Hong, T.S. Kim, W.T. Kim, B.S. Chun, Materials Science and Engineering A, 226-228 (1997) 878-882
205. A Numerical Investigation of Elastic and Plastic Properties in Nanocrystalline Materials, Journal of Korean Powder Metallurgy Institute, H.S. Kim, S.J. Hong, 34 (1996) (Domestic)
206. Fabrication of Rapidly Solidified Al-20wt%Si-5wt%Fe Alloy Powder and Mechanical Properties of its Extrudates, T.S. Kim, S.J. Hong, W.T. Kim, B.S. Chun, Journal of Korea Powder Metallurgy Institute , 1, 1994 (Domestic)